[linux-dvb] stb0899 troubles

Manu Abraham abraham.manu at gmail.com
Sat Feb 24 08:55:04 CET 2007


On 2/23/07, Bernhard Rosenkraenzer <bero at arklinux.org> wrote:
> On Friday, 23. February 2007 12:03, Manu Abraham wrote:
> > You need to use the modified version of szap (temporarily)
> > ..http://kromtek.com/dvb/szap.c
>
> Thanks - but it doesn't help:
>

Works at my side and for a couple of others..looking at the logs,

> [root at testbox szap]# ./patched_szap -c channels-conf/dvb-s/Astra-19.2E n24
> reading channels from file 'channels-conf/dvb-s/Astra-19.2E'
> zapping to 34 'N24':
> sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x07ff, apid =
> 0x0800 sid = 0x002f
> Querying info .. Delivery system=DVB-S
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> FE_DISEQC_SEND_MASTER_CMD failed: Connection timed out
> -------------------------------------------------------> Using 'STB0899 DVB-S'
> DVB-Sstatus 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 0000 | snr 0000 | ber 00000000 | unc fffffffe |
> ...
>
>
> While patched_szap is running, the driver logs these bits:
> stb0899_init: Initializing STB0899 ...
[..]
> stb0899_search: Frequency=0, Srate=0
>

the application failed to send Frequency and symbol rate to the driver .. ?

Did you use the patches or the tarball ? (You shouldn't see this issue
if you are using the tree) If you used the patches, change MINOR
VERSION from 1 to 2 in version.h and you are ahead. (Forgot to push in
the version patch) will need to push in that as well.


Regards,
Manu



More information about the linux-dvb mailing list