[linux-dvb] Re: Nova-t 500 simple loading problem

Jeffrey Borg jeffrey at borgs.net
Wed Jan 31 23:19:22 CET 2007


This is thi initial load

Jan 30 20:47:29 tux2 dib0700: loaded with support for 2 different 
device-types
Jan 30 20:47:29 tux2 dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in 
cold state, will try to load a firmware
Jan 30 20:47:29 tux2 dvb-usb: did not find the firmware file. 
(dvb-usb-dib0700-01.fw) Please see linux/Documentation/dvb/ for more 
details on firmware-problems.
(-2)


a liile while later (I did the modprobe manually)
Jan 30 20:49:39 tux2 usbcore: deregistering interface driver 
dvb_usb_dib0700
Jan 30 20:49:44 tux2 dib0700: loaded with support for 2 different 
device-types
Jan 30 20:49:45 tux2 dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in 
cold state, will try to load a firmware
Jan 30 20:49:45 tux2 dvb-usb: downloading firmware from file 
'dvb-usb-dib0700-01.fw'
Jan 30 20:49:45 tux2 dib0700: firmware started successfully.
Jan 30 20:49:45 tux2 dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in 
warm state.
Jan 30 20:49:45 tux2 **WARNING** I2C adapter driver [Hauppauge Nova-T 500 
Dual DVB-T] forgot to specify physical device; fix it!
Jan 30 20:49:45 tux2 dvb-usb: will pass the complete MPEG2 transport 
stream to the software demuxer.
Jan 30 20:49:45 tux2 DVB: registering new adapter (Hauppauge Nova-T 500 
Dual DVB-T).
Jan 30 20:49:45 tux2 **WARNING** I2C adapter driver [DiBX000 tuner I2C 
bus] forgot to specify physical device; fix it!
Jan 30 20:49:45 tux2 DVB: registering frontend 1 (DiBcom 3000MC/P)...
Jan 30 20:49:45 tux2 MT2060: successfully identified (IF1 = 1220)
Jan 30 20:49:46 tux2 dvb-usb: will pass the complete MPEG2 transport 
stream to the software demuxer.
Jan 30 20:49:46 tux2 DVB: registering new adapter (Hauppauge Nova-T 500 
Dual DVB-T).
Jan 30 20:49:46 tux2 **WARNING** I2C adapter driver [DiBX000 tuner I2C 
bus] forgot to specify physical device; fix it!
Jan 30 20:49:46 tux2 DVB: registering frontend 2 (DiBcom 3000MC/P)...
Jan 30 20:49:46 tux2 MT2060: successfully identified (IF1 = 1220)
Jan 30 20:49:46 tux2 dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully 
initialized and connected.
Jan 30 20:49:46 tux2 usbcore: registered new interface driver 
dvb_usb_dib0700


I am still not 100% sure why the frimware is found on the 2nd loading.

Jeffrey


On Wed, 31 Jan 2007, Eduard Huguet wrote:

> Ok, then I have no idea why you get this error first time. Try to post your
> dmesg file, maybe it can help.
>
> Cheers
> Eduard
>
>
>
>
> 2007/1/31, Jeffrey Borg <jeffrey at borgs.net>:
>> 
>> Hi
>> 
>> Everything is a module for the dvb stuff, even the other card needs
>> firmware. Just that this one dosen't initalize the first time.
>> 
>> Jeffrey
>> 
>> On Wed, 31 Jan 2007, Eduard Huguet wrote:
>> 
>> > Hi,
>> >   ¿Do you compile the driver for the card as a module? Make sure you do,
>> > because that card needs the firmware to be loaded, and if the driver is
>> > compiled inside the kernel (not as a module) then it initializes too
>> early
>> > (before file systems are mounted) and it won't find the firmware file.
>> >
>> > Cheers
>> >
>> 
>


More information about the linux-dvb mailing list