[linux-dvb] New DiB0700-firmware

Soeren Sonnenburg dvb-ml at nn7.de
Mon Jul 30 20:46:19 CEST 2007


On Mon, 2007-07-30 at 18:55 +0200, Patrick Boettcher wrote:
> On Mon, 30 Jul 2007, Nicolas Will wrote:
> > How should we go about this?
> > 
> > Would this be OK?
> > 
> >         $ hg clone http://linuxtv.org/hg/~pb/v4l-dvb/
> 
> Yes.
[...]
> We found something wrong in the old firmware and I think it was that which 
> was causing sometimes i2c-errors on the STK7700P and maybe even the 
> disconnects of the Nova-T 500.

Hi Patrick,

I don't get any lock with the new firmware/driver. I tried 2 dib0700
based devices (nova-t / hama dongle). It used to work before but just
now with the new driver does nothing (though the dvb-t pci cards still
get a lock):

This is what I see in dmesg:

for nova-t:

dib0700: loaded with support for 5 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-03-pre1.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
DVB: registering frontend 2 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

and for hama

dib0700: loaded with support for 5 different device-types
dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-03-pre1.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Uniwill STK7700P based (Hama and others)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Uniwill STK7700P based (Hama and others))
DVB: registering frontend 2 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1220)
dvb-usb: Uniwill STK7700P based (Hama and others) successfully initialized and connected.

Any ideas?
Soeren



More information about the linux-dvb mailing list