[linux-dvb] Anubis Electronics "Lifeview"(0x10fd:0x1513) (was: msi digivox mini ii)

Aapo Tahkola aet at rasterburn.org
Sat Mar 3 02:10:41 CET 2007


On Fri, 02 Mar 2007 23:06:15 +0100
Pierre Willenbrock <pierre at pirsoft.dnsalias.org> wrote:

> Michael Krufky schrieb:
> > Pierre Willenbrock wrote:
> >> Hi list,
> >>
> >> I am owner of a "MSI DIGIVOX mini-II". I got it to work using the
> >> attached patch and firmware. The patch and firmware are the result
> >> of analyzing some usb logs from windows.
> >>
> >> The patch breaks all users of tda10046, as i don't understand how
> >> that chip is supposed to work. The same goes for my driver
> >> implementation of the Philips 8275a.
> >>
> >> So this mess needs to be fixed before it can go into the
> >> repository.
> >>
> >> The patch is against a fresh hg checkout from
> >> http://linuxtv.org/hg/v4l-dvb at 2007-02-22 21:00 UTC.
> >>
> >> Regards,
> >>   Pierre
> > 
> > Pierre-
> > 
> > I am very happy to hear that you got this device working...
> > Interestingly enough, we have already created a new tda827x dvb fe
> > module, which might be better for your device...  This new tda827x
> > module has not yet been merged into the master v4l-dvb repository,
> > but it will be soon.  Could you try to use the code located in:
> > 
> > http://linuxtv.org/hg/~hhackmann/v4l-dvb
> > 
> > The tda827x module will be able to detect the difference between
> > the tda8275 and the tda8275a ...  You do not have to fill the
> > callback functions in the config struct -- that is really meant as
> > a hack for some required GPIO handling in the saa7134-dvb driver
> > for input switching.
> > 
> > If you can generate a new patch against the repository above, it
> > would make it _much_ easier to integrate your patch into the
> > sources.   After you get that done, we can work out the tda1004x
> > differences.
> > 
> > You might also want to speak to aett and friedrich, regulars of the
> > #linuxtv irc chat room on irc.freenode.net ... aet is the author of
> > the m920x driver, and friedrich has the same device that you have.
> > They have been working on it, but haven't yet gotten successful
> > results.
> > 
> > Good work!  Hopefully we can clean this up after you generate a new
> > patch using the tda827x module from hhackmann's repository.
> > 
> > Regards,
> > 
> > Mike Krufky
> > 
> 
> Hi Mike and Hartmut,
> 
> this time, the patch does not change tda827x.c at all. I fiddled with
> the PHY2 value in tda1004x.c and found it to be related to the
> IF(there seems to be some factor between the IF and PHY2 introduced
> somewhere else). This leaves some differences in tda1004x.c. I don't
> know what to do with these, so i would be glad to get any hints.


Updated patch. I'm fine with these m920x changes.

-- 
Aapo Tahkola
-------------- next part --------------
A non-text attachment was scrubbed...
Name: msi-digivox-mini-ii-6.diff
Type: text/x-patch
Size: 10221 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20070303/4fb6ec9a/msi-digivox-mini-ii-6-0001.bin


More information about the linux-dvb mailing list