[linux-dvb] HVR4000 - two questions

Igor Nikanov goga777 at bk.ru
Sat Nov 3 21:53:28 CET 2007


Hi

1) my hvr4000 with drivers from http://dev.kewl.org/hvr4000/hg/stoth/
can't lock some dvb-s transponders with high SR (more than 44000). SS1 on VDR, Dreambox 7000 work with
this SR without any problem. (BTW, with low SR hvr4000 works very well)

For example,

Express 53E

# scan 53 -v
scanning 53
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 11044000 V 44953000 3

>>> tune to: 11044:v:0:44953
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1294000
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
WARNING: >>> tuning failed!!!
>>> tune to: 11044:v:0:44953 (tuning failed)
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1294000
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
>>> tune to: 11096:v:0:6400

the same situation with Express 80E

# scan 80 -v 
scanning 80
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 10973000 V 4444000 3
initial transponder 10991000 V 4444000 3
initial transponder 11044000 H 44948000 5
initial transponder 11606000 V 44948000 5
>>> tune to: 10973:v:0:4444
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1223000
>>> tuning status == 0x1f
PAT
PMT 0x1079 for service 0x0001
SDT (actual TS)
0x0000 0x0001: pmt_pid 0x1079 Scopus Network Technologies -- ENISEY-REGION (running)
NIT (actual TS)
Network Name 'Scopus'
>>> tune to: 10991:v:0:4444
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1241000
>>> tuning status == 0x1f
PAT
PMT 0x0400 for service 0x0014
PMT 0x0200 for service 0x0012
SDT (actual TS)
0x0000 0x0012: pmt_pid 0x0200 CRCTRC-11 -- OTC (running)
WARNING: filter timeout pid 0x0500
WARNING: filter timeout pid 0x0010
>>> tune to: 11044:h:0:44948
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1294000
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
WARNING: >>> tuning failed!!!
>>> tune to: 11044:h:0:44948 (tuning failed)
DiSEqC: switch pos 0, 18V, loband (index 1)
DVB-S IF freq is 1294000
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
>>> tune to: 11606:v:0:44948
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1856000
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
>>> tune to: 11606:v:0:44948 (tuning failed)
DiSEqC: switch pos 0, 13V, loband (index 0)
DVB-S IF freq is 1856000
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x03
>>> tuning status == 0x01
>>> tuning status == 0x03
>>> tuning status == 0x03
WARNING: >>> tuning failed!!!
dumping lists (4 services)
Done.


2) My diseqc switch didn't operate by A/A input with diseqc commands from hvr4000. 
>>> tune to: 11044:v:0:44953
DiSEqC: switch pos 0, 13V, loband (index 0)

>>> tune to: 11606:v:0:44948 (tuning failed)
DiSEqC: switch pos 0, 13V, loband (index 0)
Now I temporary removed my diseqc switch.

Is there any ideas ?

regards
Igor









More information about the linux-dvb mailing list