[linux-dvb] RE : Re: support from cx23885 driver and Xc3028 tuner for HP/Hauppauge WinTv885 mod 77001

aldebaran aldebx at yahoo.fr
Mon Oct 15 20:37:14 CEST 2007


Dear Devs, Dear Mike,
as you requested here below is the output of 'modprobe cx23885 i2c_scan=1'
I'm not going to make any pressure on you, however please consider I'm available for any beta testing work or any other help that could ease your work. 

I did a little googling for the tuning chip xc3028 and found George Kiagiadakis (Gkiagia) has already started working on it http://mcentral.de/wiki/index.php/Xc3028 (http://mcentral.de/firmware/firmware_v4.tgz I tried copying these firmwares inside /lib/firmware/linux-blahblah/ but Kaffeine is still not able to scan for channels) maybe I should try with the experimental trunk, so far I used a mercurial snapshot of http://linuxtv.org/hg/v4l-dvb trunk. 

If you need any more information please do not hesitate to send me an email!
In the meantime I thank you for your efforts and wish you a good work.

192000] cx23885 driver version 0.0.1 loaded
192000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
192000] CORE cx23885[0]: subsystem: 0070:7717, board: UNKNOWN/GENERIC [card=0,autodetected]
292000] cx23885[0]: i2c bus 0 registered
304000] cx23885[0]: i2c scan: found device @ 0xa0  [eeprom]
312000] cx23885[0]: i2c bus 1 registered
328000] cx23885[0]: i2c bus 2 registered
332000] cx23885[0]: i2c scan: found device @ 0x66  [???]
332000] cx23885[0]: i2c scan: found device @ 0x88  [cx25837]
332000] cx23885[0]: i2c scan: found device @ 0x98  [???]
364000] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xf4000000

Michael Krufky <mkrufky at linuxtv.org> a écrit :It would be helpful to see the output of 'modprobe cx23885 i2c_scan=1' , 
after first doing 'modprobe -r cx23885' -- I have this card also, and 
I'd like to make sure that we have the same revision.

I started working on this one, but I've been held up due to firmware 
issues--  So far, the working ATSC linux drivers for the xc3028 have all 
worked when coupled with an LGDT3303 demod.  In your device, we have a 
Samsung demodulator, instead.  The xc3028 requires a different firmware 
image in this case, and I haven't yet found time to work that out.

I'd expect to have the details sorted within the next month or so, but I 
don't want to make any promises.

HTH,

Mike



       
---------------------------------
 Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20071015/abfe543f/attachment.htm 


More information about the linux-dvb mailing list