[linux-dvb] [PATCH] support Cinergy HT USB XE (0ccd:0058)

Albert Comerma albert.comerma at gmail.com
Tue Feb 12 20:36:22 CET 2008


Hi Hans, you where faster than me... I don't understand what you did with
the firmware. I just extracted the xc3028-v27.fw from the win driver as
commented in other threads.
Then I added my card (pinnacle 320cx) to your patch with some
mid-successfully results, this is the dmesg;

[ 8067.028000] usb 1-1: new high speed USB device using ehci_hcd and address
4
[ 8067.160000] usb 1-1: configuration #1 chosen from 1 choice
[ 8067.160000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in cold state,
will try to load a firmware
[ 8067.164000] dvb-usb: downloading firmware from file '
dvb-usb-dib0700-1.10.fw'
[ 8067.360000] dib0700: firmware started successfully.
[ 8067.864000] dvb-usb: found a 'Pinnacle Expresscard 320cx' in warm state.
[ 8067.864000] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 8067.864000] DVB: registering new adapter (Pinnacle Expresscard 320cx)
[ 8068.236000] DVB: registering frontend 0 (DiBcom 7000PC)...
[ 8068.236000] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
[ 8068.236000] input: IR-receiver inside an USB DVB receiver as
/class/input/input13
[ 8068.236000] dvb-usb: schedule remote query interval to 150 msecs.
[ 8068.236000] dvb-usb: Pinnacle Expresscard 320cx successfully initialized
and connected.

But when I start kaffeine i got this error;

[ 8144.084000] xc2028 4-0061: Error on line 1063: -5

And when I try to scan I get more errors;
[ 8176.032000] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw,
type: xc2028 firmware, ver 2.7
[ 8176.032000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 8176.032000]
[ 8176.060000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
[ 8176.060000] dib0700: stk7700ph_xc3028_callback: XC2028_TUNER_RESET 0
[ 8176.060000]
[ 8182.548000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id
0000000000000000.
[ 8182.668000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
[ 8182.688000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1
[ 8182.688000]
[ 8184.364000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware
version 2.7
[ 8184.384000] dib0700: stk7700ph_xc3028_callback: XC2028_RESET_CLK 1

Any idea? is this related to the firmware??

Albert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080212/031e4f1d/attachment.htm 


More information about the linux-dvb mailing list