[linux-dvb] [PATCH] support Cinergy HT USB XE (0ccd:0058)
patrick.boettcher at desy.de
Fri Feb 15 21:47:00 CET 2008
For the DiB7000 the code I sent is requiring a 5.2 IF firmware.
Although it should be possible to recover an offset of 200kHz I would
recommend to use this firmware.
Mail: patrick.boettcher at desy.de
On Fri, 15 Feb 2008, Mauro Carvalho Chehab wrote:
> Hi Albert,
> On Thu, 14 Feb 2008 21:20:32 +0100
> "Albert Comerma" <albert.comerma at gmail.com> wrote:
>> [ 2251.856000] xc2028 4-0061: Error on line 1063: -5
> The above error is really weird. It seems to be related to something that
> happened before xc2028, since firmware load didn't start on that point of the
>> [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
> This message means that xc3028 firmware were successfully loaded and it is
> running ok.
>> [ 2282.504000] xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
>> [ 2289.104000] xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000.
>> [ 2289.224000] xc2028 4-0061: Loading SCODE for type=DTV8 SCODE HAS_IF_5400 (60000200), id 0000000000000000.
> The above messages state what firmware you've loaded.
> xc3028 version 2.7 has 80 different firmwares. If you load a wrong one, your
> device won't work.
>> From the above, the driver is assuming that you're on an area with 8MHz video
> channels. Also, your demod should be using IF = 5.4 MHz:
> Firmware 64, type: DTV8 CHINA SCODE HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192
> Does the above firmware correspond to your configuration?
> linux-dvb mailing list
> linux-dvb at linuxtv.org
More information about the linux-dvb