[linux-dvb] [PATCH] support Cinergy HT USB XE (0ccd:0058)

Albert Comerma albert.comerma at gmail.com
Sat Feb 16 17:42:44 CET 2008


More information... I attach a dmesg of tuner-xc2028 loaded in debug mode
while doing a scan ( scan es-Collserola|tee channels.conf ). I don't see any
problem, but it doesn't work.

Albert

2008/2/16, Albert Comerma <albert.comerma at gmail.com>:
>
> For what I understand, changing the Firmware 64 to 60000200 changes the if
> frequency to 5.2MHz. So this modification on the firmware should make the
> card work. What it's more strange for me is that when trying to scan no
> signal or SNR is reported, so it seems like xc3028 firmware is not working
> properly. Perhaps could be a wrong BASE or DTV firmware loaded?
>
> Albert
>
> 2008/2/16, Albert Comerma <albert.comerma at gmail.com>:
> >
> > So, If it's not a problem, any of you could send me the current xc3028
> > firmware you are using, because mine does not seem to work... Thanks.
> >
> > Albert
> >
> > 2008/2/15, Patrick Boettcher <patrick.boettcher at desy.de>:
> > >
> > > Aah now I remember that issue, in fact it is no issue. I was seeing
> > > that
> > > problem when send the sleep command or any other firmware command
> > > without
> > > having a firmware running. In was, so far, no problem.
> > >
> > > Patrick.
> > >
> > >
> > >
> > > On Fri, 15 Feb 2008, Holger Dehnhardt wrote:
> > >
> > > > Hi Albert, Hi Mauro,
> > > >
> > > > I have successfulli patched and compiled the driver. Im using the
> > > terratec
> > > > cinergy device and it works fine.
> > > >
> > > >>> [ 2251.856000] xc2028 4-0061: Error on line 1063: -5
> > > >
> > > > This error message looked very familar to me, so i searched my log
> > > and guess
> > > > what I found:
> > > >
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: xc2028_sleep called
> > > > Feb 15 20:42:18 musik kernel: xc2028 3-0061: Error on line 1064: -5
> > > > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for
> > > demod df75e800
> > > > to 0
> > > > Feb 15 20:42:18 musik kernel: DiB7000P: setting output mode for
> > > demod df75e800
> > > > to 0
> > > >
> > > > It identifies the marked line (just to be sure because of the
> > > differen line
> > > > numbers)
> > > >
> > > >       if (priv->firm_version < 0x0202)
> > > > ->            rc = send_seq(priv, {0x00, 0x08, 0x00, 0x00});
> > > >       else
> > > >               rc = send_seq(priv, {0x80, 0x08, 0x00, 0x00});
> > > >
> > > >> The above error is really weird. It seems to be related to
> > > something that
> > > >> happened before xc2028, since firmware load didn't start on that
> > > point of
> > > >> the code.
> > > >
> > > > The error really is weird, but it does not seem to cause the
> > > troubles - my
> > > > card works despite the error!
> > > >
> > > >>
> > > >>> [ 2289.284000] xc2028 4-0061: Device is Xceive 3028 version 1.0,
> > > firmware
> > > >>> version 2.7
> > > >>
> > > >> This message means that xc3028 firmware were successfully loaded
> > > and it is
> > > >> running ok.
> > > >
> > > > This and the following messages look similar...
> > > >
> > > > Holger
> > > >
> > > > _______________________________________________
> > > > linux-dvb mailing list
> > > > linux-dvb at linuxtv.org
> > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > > >
> > >
> > > _______________________________________________
> > > linux-dvb mailing list
> > > linux-dvb at linuxtv.org
> > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080216/792ac863/attachment-0001.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: dmesg.txt
Url: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080216/792ac863/attachment-0001.txt 


More information about the linux-dvb mailing list