[linux-dvb] Hauppauge WinTV-HVR4000 and DVB-S2...

Zenon Mousmoulas zmousm at admin.grnet.gr
Tue Feb 19 16:07:26 CET 2008


On 19 Φεβ 2008, at 4:59 ΜΜ, Igor wrote:

>>> could you show the szap2 output during dvb-s2 tuning
>>
>> I just tried it again with 2.6.22:
>>
>> tvbox2:~# szap2 -r -t2 -e3 -m8 -c tvbox_dvb/zap/dvb-s/
>> diseqc4_HellasSat2-39.0E.new LUXETV
>> reading channels from file 'tvbox_dvb/zap/dvb-s/
>> diseqc4_HellasSat2-39.0E.new'
>> zapping to 2 'LUXETV':
>> sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,
>> apid = 0x0bc6 sid = 0x012d (fec = 64, mod = 8)
>> Querying info .. Delivery system=DVB-S2
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> ioctl DVBFE_GET_INFO failed: Operation not supported
>>
>> I will try it again shortly with 2.6.24.
>
> try to use the usual szap, not szap2

I already did. It didn't work...

tvbox2:~# szap -c tvbox_dvb/zap/dvb-s/diseqc4_HellasSat2-39.0E.new  
LUXETV
reading channels from file 'tvbox_dvb/zap/dvb-s/ 
diseqc4_HellasSat2-39.0E.new'
zapping to 2 'LUXETV':
sat 3, frequency = 12718 MHz H, symbolrate 7720000, vpid = 0x0bc3,  
apid = 0x0bc6
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f240 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f340 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal f280 | snr 0000 | ber 00000000 | unc 00000000 |





More information about the linux-dvb mailing list