[linux-dvb] [EXPERIMENTAL] cx88+xc3028 - tests are required - was: Re: When xc3028/xc2028 will be supported?

Dâniel Fraga fragabr at gmail.com
Tue Feb 19 18:43:56 CET 2008


On Tue, 19 Feb 2008 13:38:45 -0300
Mauro Carvalho Chehab <mchehab at infradead.org> wrote:

> I've did some changesets fixing both drivers at:
> 	http://linuxtv.org/hg/~mchehab/cx88-xc2028/

> Dâniel Fraga,
> 
> Please test if the gpio's from Daniel Gimpelvinch works for you, against the
> newer tree. I suspect it will work. However, is it not uncommon to have two
> cards with the same brand name, but needing different gpio settings.

	Some good news Mauro:

cx88[0]: subsystem: 14f1:ea3d, board: PowerColor Real Angel 330
[card=62,autodetected] cx88[0]: TV tuner type 71, Radio tuner type 0
tuner' 0-0061: chip found @ 0xc2 (cx88[0])
xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 0-0061: xc2028/3028 firmware name not set!
cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, mmio:
0xfc000000 cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type:
xc2028 firmware, ver 2.7 cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback

	Notice that it's loading the firmware correctly now ;). I tried
xawtv and gqradio (and radio from xawtv too). I hear just white noise.
I tried to change the gpios, but without success...

	Maybe Daniel Gimpelevich could try on his Powercolor to confirm
this.... I think we're almost there... 

cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE FM (401), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000.
xc2028 0-0061: Loading SCODE for type=SCODE HAS_IF_3280 (60000000), id
0000000000000000. xc2028 0-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7 cx88[0]: Calling XC2028/3028 callback
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=BASE FM (401), id
0000000000000000. cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000.
xc2028 0-0061: Loading SCODE for type=SCODE HAS_IF_3280 (60000000), id
0000000000000000. xc2028 0-0061: Device is Xceive 3028 version 1.0,
firmware version 2.7 cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback
xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
cx88[0]: Calling XC2028/3028 callback

	



-- 



More information about the linux-dvb mailing list