[linux-dvb] Compro E800F Hybrid D/A HW2 PCIe card

Thomas Goerke tom at goeng.com.au
Wed Jul 23 19:03:42 CEST 2008


I have purchased a Compro E800F Hybrid D/A HW2 PCIe card.  The chips on the card include:
        Conexant PCIe A/V decoder: CX23885-132
        Conexant MPEG II A/V/Encoder CX23417-11Z
        Zarlink ZL10353 Demodulator
        Xceiver XC3008ACQ Video Tuner
I have tried a number of solutions including building the latest copy of v4l-dvb and using the cx23885 module with card=4 option.
The problem I am having is that the lgdt330x module is being loaded with the cx23885, however my demodulator is the zarlink ZL10353.  I am not sure on how to proceed.  Please see below for output of lspci -vvnn.

03:00.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:8852] (rev 02)
        Subsystem: Compro Technology, Inc. Unknown device [185b:e800]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <2us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Vital Product Data
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

Any help appreciated.

Thanks




More information about the linux-dvb mailing list