[linux-dvb] KNC1 DVB-C Plus: Can't find channels at a specific frequency

Peter Ueger peter.ueger at googlemail.com
Thu Jun 5 18:47:28 CEST 2008


Greetings!

I have problems finding a couple of channels at a specific frequency
(538000MHz). I can find these channels with my set-top box and also
with a different DVB-C card so they must be there. Under Windows XP I
have the same problem with this card and the software there gives the
failure message "PTA Table incomplete".

$ lspci -v
[...]
00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One Unknown device 0021
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at fb022000 (32-bit, non-prefetchable) [size=512]

$ dmesg | grep -i dvb
[   27.962301] DVB: registering new adapter (KNC1 DVB-C Plus)
[   28.530779] DVB: registering frontend 0 (Philips TDA10021 DVB-C)...

$ scan tuningdata > channels.conf
[...]
>>> tune to: 538000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010



More information about the linux-dvb mailing list