[linux-dvb] Terratec Cinergy Piranha

Nicolas Christener lists at 0x17.ch
Fri Jun 6 19:58:12 CEST 2008


Hi Dennis, hello list

Am Freitag, den 06.06.2008, 16:59 +0200 schrieb Dennis Noordsij:

[...]

> Ah, yes. Sorry forgot to mention one part. As you can tell from the log,
> the default mode is DVB-H.
> 
> use:    modprobe sms1xxx default_mode=0

ah yep this does the trick :)
Now I got the devices:
[nicolas at oipunk:/dev/dvb]$ find .
.
./adapter0
./adapter0/frontend0
./adapter0/dvr0
./adapter0/demux0

and `dmesg' looks good too. Thanks very much!

However there is something left and I'm not sure, if it is a driver
issue. Most probably the driver is OK and I'm doing something wrong ;)
As far as I know, I now need to create a channels.conf file for xine,
mplayer... Thats what I did:

[nicolas at oipunk:~/temp/tv/dvb-apps-9311c900f746/util/scan]$ ./scan
dvb-t/ch-All 
scanning dvb-t/ch-All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 482000000 0 5 9 1 1 3 0
[...]
>>> tune to:
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to:
482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
514000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_5_6:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
[...]
ERROR: initial tuning failed
dumping lists (0 services)
Done.

I hope this is not a stupid newbie problem, but until now I couldn't
find a solution. I also tried the `w_scan' utility which couldn't find
any channels either.

I would very much appreciate any help.

kind regards
Nicolas




More information about the linux-dvb mailing list