[linux-dvb] AzureWave VP 1041 DVB-S2 problem

[Claes Lindblom]

Hi, 
I have some problems with my  AzureWave AD-SP400 (VP 1041) card.

Some background info before the problem:
I'm running on a Slamd64 distro with a 2.6.24.2 kernel and I have
the latest code from http://jusst.de/hg/mantis, compiled and installed 
successfully.

Downloaded and built http://jusst.de/manu/scan.tar.bz2 successfully and 
it can scan both DVB-S and DVB-S2.
I then downloaded http://abraham.manu.googlepages.com/szap.c and built 
it according to 
http://www.linuxtv.org/pipermail/linux-dvb/2007-October/021474.html 
without any problems.

Now to the problem itself.
When I run
szap -r -i -a 1 -l UNIVERSAL -t 0 -c channels.conf "The Poker Channel"
and
mplayer /dev/dvb/adapter1/dvr0

mplayer says...

TS file format detected.
VIDEO MPEG2(pid=515) AUDIO MPA(pid=652) NO SUBS (yet)!  PROGRAM N. 0
VIDEO:  MPEG2  544x576  (aspect 3)  25.000 fps  15000.0 kbps (1875.0 kbyte/s)


and the picture is shown.

When i run 
szap -r -p -i -a 1 -l UNIVERSAL -t 2 -c channels.conf "SVT HD"
and
mplayer /dev/dvb/adapter1/dvr0

mplayer says

TS file format detected.
VIDEO MPEG2(pid=512) AUDIO MPA(pid=640) NO SUBS (yet)!  PROGRAM N. 0


and nothing else happens. I think it should detect a h264 stream.
I have tested with and without the -p option for szap with the same results.

/dev/adapter1 is a dvbloopback device and I have successfully tuned in to the channel "SVT HD" with h264 stream
on a DVB-C card so the problem must be somewhere in the DVB-S/S2 implementation?

Can anyone give me some hints of what's wrong here?

Regards
/Claes