[linux-dvb] TT Connect S2-3650 CI unsupported device but partially working
Faruk A
fa at elwak.com
Tue Mar 25 21:43:35 CET 2008
On Fri, Mar 21, 2008 at 6:01 PM, Faruk A <fa at elwak.com> wrote:
>
> On Wed, Mar 19, 2008 at 7:31 AM, P. van Gaans <w3ird_n3rd at gmx.net> wrote:
> >
> > On 03/19/2008 12:12 AM, Faruk A wrote:
> > > TechnoTrend TT-connect S2-3650 CI
> > > Vendor ID: 0b48
> > > Product ID: 300a
> > > http://www.technotrend.de/2715/TT-connect__S2-3650_CI.html
> > >
> > > Hi
> > >
> > > This my first DVB card i bought it two weeks ago and it works great in
> > > windows, I knew it was unsupported in Linux but it was cheap and plus
> > > CI :) i couldn't resist.
> > >
> > > I saw Dominik Kuhlen's Pinnacle 452e and André Weidemann's TT-connect
> > > S2-3600 patch and i thought why not try it and i did. All i did was
> > > change product id from 3007 to 300a, downloaded the the source,
> > > patched it and compiled.
> > >
> > > cd v4l
> > > insmod dvb-core.ko
> > > insmod dvb-pll.ko
> > > insmod stb6100.ko verbose=0
> > > insmod stb0899.ko verbose=0
> > > insmod lnbp22.ko
> > > insmod dvb-usb.ko
> > > insmod dvb-usb-pctv452e.ko
> > > .............................................
> > > dmesg
> > >
> > > dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state.
> > > pctv452e_power_ctrl: 1
> > > dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> > > DVB: registering new adapter (Technotrend TT connect S2-3600)
> > > pctv452e_frontend_attach Enter
> > > stb0899_write_regs [0xf1b6]: 02
> > > stb0899_write_regs [0xf1c2]: 00
> > > stb0899_write_regs [0xf1c3]: 00
> > > stb0899_write_regs [0xf141]: 02
> > > _stb0899_read_reg: Reg=[0xf000], data=82
> > > stb0899_get_dev_id: ID reg=[0x82]
> > > stb0899_get_dev_id: Device ID=[8], Release=[2]
> > > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
> > > Offset=[0xf334], Data=[0x444d4431]
> > > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400],
> > > Offset=[0xf33c], Data=[0x00000001]
> > > stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1]
> > > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
> > > Offset=[0xfa2c], Data=[0x46454331]
> > > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800],
> > > Offset=[0xfa34], Data=[0x00000001]
> > > stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1]
> > > stb0899_attach: Attaching STB0899
> > > lnbp22_set_voltage: 2 (18V=1 13V=0)
> > > lnbp22_set_voltage: 0x60)
> > > pctv452e_frontend_attach Leave Ok
> > > DVB: registering frontend 0 (STB0899 Multistandard)...
> > > pctv452e_tuner_attach Enter
> > > stb6100_attach: Attaching STB6100
> > > pctv452e_tuner_attach Leave
> > > input: IR-receiver inside an USB DVB receiver as
> > > /devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8
> > > dvb-usb: schedule remote query interval to 500 msecs.
> > > pctv452e_power_ctrl: 0
> > > dvb-usb: Technotrend TT connect S2-3600 successfully initialized and connected.
> > > usbcore: registered new interface driver pctv452e
> > > .................................................................
> > >
> > > ls /dev/dvb/adapter0/
> > > demux0 dvr0 frontend0 net0
> > > .........................................................................
> > > I can scan the channels using patched scan program but vdr format
> > > output doesn't work, it just make
> > > empty channels.conf file. The zap format works :)
> > >
> > > I can lock to lnb1 (Thor 1W) lnb2 (Sirius 5E) lnb3 (Hotbird 13E) lnb4
> > > (Astra 19E) using the patched szap but when i wanna lock to channels
> > > on different satellite i have to always first lock on lnb1 (Thor).
> > > One more thing it doesn't lock with multiproto changeset 7208 and above.
> > >
> > > No CI support and remote control is like 80% percent working.
> > > .................................................................................................................................
> > > I have tried vdr with this card not good at all :( or maybe its just
> > > me. As i mentioned before the scan
> > > program doesn't produce the vdr format. I had to use vdr settings from
> > > this site http://www.linowsat.com.
> > >
> > > When i start vdr it doesn't lock to any channels or satellite just
> > > plain no signal, I have have to first szap -r "any channels on lnb1"
> > > kill it and start vdr i can only get pictures from only 2 FTA channels
> > > BBC World;Telenor:11325:hC78:S1.0W:24500:513:644=eng:577:0:1001:70:25:0
> > > Gospel Channel Europe;Telenor:11325:hC78:S1.0W:24500:514:648=eng:0:0:129:70:25:0
> > > i can't switch to different satellite just plain no signal maybe wrong
> > > diseqc settings?
> > >
> > > This is what i have in diseqc.conf
> > > # Input 1 - Thor - uncommited switch input 1
> > >
> > > S1W 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t
> > > S1W 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T
> > > S1W 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t
> > > S1W 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T
> > >
> > > # Input 2 - Sirius 5.0E - uncommited switch input 1
> > >
> > > S5E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t
> > > S5E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T
> > > S5E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t
> > > S5E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T
> > >
> > > # Input 3 - Hotbird - uncommited switch input 1
> > >
> > > S13E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
> > > S13E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T
> > > S13E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t
> > > S13E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T
> > >
> > > # Input 4 Astra 1 19.2E - uncommited switch input 1
> > >
> > > S19.2E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t
> > > S19.2E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T
> > > S19.2E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t
> > > S19.2E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T
> > > .....................................................................................................................
> > > In Windows with Alt-DVB
> > >
> > > Type: Commited LNB: 1 Raw command: E0 10 38 F0
> > > Type: Commited LNB: 2 Raw command: E0 10 38 F4
> > > Type: Commited LNB: 3 Raw command: E0 10 38 F8
> > > Type: Commited LNB: 4 Raw command: E0 10 38 FC
> > > ......................................................................................................................
> > >
> > >
> > > Anybody wanna works on this this? I'd be willing to help in any way I can.
> > >
> > > Best regards,
> > > Faruk
> > >
> > >
> > > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > linux-dvb mailing list
> > > linux-dvb at linuxtv.org
> > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> > I don't know diseqc.conf (VDR-specific?) or VDR, but the comment says
> > "uncommited switch input 1" everywhere and I see two DiSEqC messages
> > (most likely one for an uncommitted switch, and the other to switch the
> > committed switch behind that). You most likely have no uncommitted
> > switches, and if you did you wouldn't need any. You only have one simple
> > 4/1 committed switch. Uncommitted only comes in when you need more than
> > 4 LNBs and means you will use DiSEqC 1.1. You don't use or need that,
> > you only need DiSeqC 1.0.
> >
>
>
> Hi!
>
> I did some testings and here is what i found out.
> I can watch channels using vdr from lnb1 (Thor 1W), lnb2 (Sirius 5E),
> lnb3 (Hotbird 13E) and lnb4 (Astra 19E).
> The catch is i can only watch one frequency. Every time i want to
> change to channels on different freq i have to
> close vdr and szap -r "channel on new freq" when it locks i close it
> and start vdr.
>
> My kernel.log looks like this when am watching channel on vdr.
>
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER |
> FE_HAS_LOCK
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI |
> FE_HAS_SYNC
> Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER |
> FE_HAS_LOCK
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI |
> FE_HAS_SYNC
> Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER |
> FE_HAS_LOCK
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI |
> FE_HAS_SYNC
> Mar 21 17:56:27 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf50d], data=18
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_CARRIER |
> FE_HAS_LOCK
> Mar 21 17:56:27 archer _stb0899_read_reg: Reg=[0xf58c], data=1a
> Mar 21 17:56:27 archer stb0899_read_status: --------> FE_HAS_VITERBI |
> FE_HAS_SYNC
> .................................................................................................................................
> When i change to channels on different freq in vdr:
>
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> Mar 21 17:58:50 archer stb0899_read_status: Delivery system DVB-S/DSS
> Mar 21 17:58:50 archer _stb0899_read_reg: Reg=[0xf50d], data=00
> ............................................................................................................
>
> Best regards
> Faruk
>
This is what happen when i load the drivers and start vdr without
first zapping with szap.
sample:
Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system
Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system
Mar 25 21:14:11 archer stb0899_read_status: Unsupported delivery system
full log @ http://pastebin.com/m3dd8b525
Best regards
Faruk
More information about the linux-dvb
mailing list