[linux-dvb] Problems with conexant CX24123/CX24109

Helmut Auer vdr at helmutauer.de
Mon Oct 20 19:55:07 CEST 2008


Helmut Auer schrieb:
> Hi,
>
> I have a Geniatech PCI DVB-s with CX24123/CX24109.
> This card cannot zap to the german ARD transponder, all other channels 
> are running fine.
> The card runs fine under windows .
> dmesg shows at loading:
>
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level, 
> low) -> IRQ 10
> cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected]
> cx88[0]: TV tuner type 4, Radio tuner type -1
> cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 165, mmio: 
> 0xfc000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> cx88[0]/2: cx2388x 8802 Driver Manager
> ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 10 (level, 
> low) -> IRQ 10
> cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 64, mmio: 
> 0xfd000000
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52]
> cx88[0]/2: cx2388x based DVB/ATSC card
> CX24123: detected CX24123
> DVB: registering new adapter (cx88[0])
> DVB: registering frontend 0 (Conexant CX24123/CX24109)...
>
> and when the error occurs:
>
> cx88[0]: irq mpeg [0x100000] ts_err?*
> cx88[0]/2-mpeg: general errors: 0x00100000
>
> Any hints where I can tune some parameters ?
>
>   
No one an idea whats wrong with the driver ?


-- 
Helmut Auer, helmut at helmutauer.de 




More information about the linux-dvb mailing list