[linux-dvb] DVB-S2 frontend doesn't work!

[Goga777]

> I have a problem with my HVR-4000 card.
> 
> I installed the firmware cx24116 find on
> http://tevii.com/Tevii_linuxdriver_0815.rar
> sudo cp tevii_linuxdriver_0815/fw/dvb-fe-cx24116.fw
> /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw
> sudo ln -s /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw
> /lib/firmware/dvb-fe-cx24116.fw
> 
> I installed S2API find on http://linuxtv.org/hg/~stoth/s2/

please use http://mercurial.intuxication.org/hg/s2-liplianin

> and I installed szap-s2 find on http://mercurial.intuxication.org/hg/szap-s2
> 
> Every seems to be ok...
> I can tune an DVB-S signal, but not DVB-S2...
> I try to tune a DVB-S2 signal with a symbols rate of 75335000 (>45000000)
> and I have this error message with dmesg :
> 
> [ 450.409150] DVB: frontend 0 symbol rate 75335000 out of range
> (1000000..45000000)
> 
> So I try dvbsnoop to see the frontend information :
> 
> # dvbsnoop -s feinfo
> dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/

dvbsnoop doesn't work with s2api 


Goga