Still having problems with the Hauppauge WinTv Nova-T Strick (M/R
70009/C1B5). I keep getting the "mt2060 I2C read failed" error message
a lot and the stick won't work properly. Any ideas how can I fix this?
I have tested the card with 2.6.17 / 18 / 20 kernels (from Gentoo
portage) and same problem occurs every time.<br><br>Thanks,<br><span class="sg"><br>Juha<br><br>The previous mail contained only the attachment so it's now included in here...<br><br>Bus 003 Device 007: ID 2040:7060 Hauppauge
<br>Device Descriptor:<br> bLength 18<br> bDescriptorType 1<br> bcdUSB 2.00<br> bDeviceClass 0 (Defined at Interface level)<br> bDeviceSubClass 0 <br> bDeviceProtocol 0
<br> bMaxPacketSize0 64<br> idVendor 0x2040 Hauppauge<br> idProduct 0x7060 <br> bcdDevice 1.00<br> iManufacturer 1 Hauppauge<br> iProduct 2 Nova-T Stick<br>
iSerial 3 4027782217<br> bNumConfigurations 1<br> Configuration Descriptor:<br> bLength 9<br> bDescriptorType 2<br> wTotalLength 46<br> bNumInterfaces 1
<br> bConfigurationValue 1<br> iConfiguration 0 <br> bmAttributes 0xa0<br> (Bus Powered)<br> Remote Wakeup<br> MaxPower 500mA<br> Interface Descriptor:<br> bLength 9
<br> bDescriptorType 4<br> bInterfaceNumber 0<br> bAlternateSetting 0<br> bNumEndpoints 4<br> bInterfaceClass 255 Vendor Specific Class<br> bInterfaceSubClass 0
<br> bInterfaceProtocol 0 <br> iInterface 0 <br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x01 EP 1 OUT
<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br>
bInterval 1<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x81 EP 1 IN<br> bmAttributes 2<br>
Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 1<br> Endpoint Descriptor:
<br> bLength 7<br> bDescriptorType 5<br> bEndpointAddress 0x82 EP 2 IN<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None
<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes<br> bInterval 1<br> Endpoint Descriptor:<br> bLength 7<br> bDescriptorType 5
<br> bEndpointAddress 0x83 EP 3 IN<br> bmAttributes 2<br> Transfer Type Bulk<br> Synch Type None<br> Usage Type Data<br> wMaxPacketSize 0x0200 1x 512 bytes
<br> bInterval 1<br>Device Qualifier (for other device speed):<br> bLength 10<br> bDescriptorType 6<br> bcdUSB 2.00<br> bDeviceClass 0 (Defined at Interface level)
<br> bDeviceSubClass 0 <br> bDeviceProtocol 0 <br> bMaxPacketSize0 64<br> bNumConfigurations 1<br>Device Status: 0x0000<br> (Bus Powered)<br></span>