Hello.<br><br>I've been running a MythTV-box on top of Ubuntun Feisty for a year now without a hitch, using Technotrend C-1500 Budget card. Now I bought the new Terratec Cinergy C and installed the Mantis drivers I got from <a href="http://jusst.de/hg/mantis/summary">http://jusst.de/hg/mantis/summary</a>. After this I got everything working fine in my Myth, but after a few days I there appeared to be a pattern where the whole machine just stops responding. This occurs every 12-24 hours and the source of it is quite hard to make out because obviously theres nothing in the logs. <br>
<br>I have tried with another Cinergy-card but the result is the same, it can't be a hardware problem. I dunno if the problem is the driver of the cinergy or perhaps the installation of mantis somehow broke the TT-card.. <br>
<br>Help would be much appreaciated. <br><br>Here's dmeg from the box.<br><br>[ 30.139218] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00<br>[ 30.139267] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40<br>[ 30.200008] saa7146: register extension 'budget_ci dvb'.<br>
[ 30.200624] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17<br>[ 30.200636] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC2] -> GSI 17 (lev<br>el, low) -> IRQ 17<br>[ 30.200665] saa7146: found saa7146 @ mem ffffc2000007a000 (revision 1, irq 17<br>
) (0x13c2,0x1010).<br>[ 30.200673] saa7146 (0): dma buffer size 192512<br>[ 30.200676] DVB: registering new adapter (TT-Budget-C-CI PCI)<br>[ 30.207133] lirc_dev: IR Remote Control driver registered, at major 61<br>
[ 30.220252] lirc_mceusb2: no version for "lirc_get_pdata" found: kernel taint<br>ed.<br>[ 30.220817]<br>[ 30.220818] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE<br>2005 Remote Control driver for LIRC $Revision: 1.25 $<br>
[ 30.220822] lirc_mceusb2: Daniel Melander <<a href="mailto:lirc@rajidae.se">lirc@rajidae.se</a>>, Martin Blatter <<br><a href="mailto:martin_a_blatter@yahoo.com">martin_a_blatter@yahoo.com</a>><br>[ 30.246198] adapter has MAC addr = 00:d0:5c:67:c3:51<br>
[ 30.246541] input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/inpu<br>t2<br>[ 30.395167] input: PC Speaker as /class/input/input3<br>[ 30.397327] DVB: registering frontend 0 (ST STV0297 DVB-C)...<br>[ 30.398064] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16<br>
[ 30.398075] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI 16 (lev<br>el, low) -> IRQ 16<br>[ 30.398102] irq: 16, latency: 32<br>[ 30.398103] memory: 0xfdaff000, mmio: 0xffffc2000007c000<br>[ 30.398106] found a VP-2040 PCI DVB-C device on (04:08.0),<br>
[ 30.398108] Mantis Rev 1 [153b:1178], irq: 16, latency: 32<br>[ 30.398112] memory: 0xfdaff000, mmio: 0xffffc2000007c000<br>[ 30.401025] MAC Address=[00:08:ca:1c:76:40]<br>[ 30.401103] mantis_alloc_buffers (0): DMA=0x35200000 cpu=0xffff810035200000 s<br>
ize=65536<br>[ 30.401111] mantis_alloc_buffers (0): RISC=0x37514000 cpu=0xffff810037514000<br>size=1000<br>[ 30.401115] DVB: registering new adapter (Mantis dvb adapter)<br>[ 30.402068] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16<br>
[ 30.402072] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (lev<br>el, low) -> IRQ 16<br>[ 30.402081] PCI: Setting latency timer of device 0000:00:05.0 to 64<br>[ 30.414831] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66<br>
)<br>[ 30.414839] Uniform CD-ROM driver Revision: 3.20<br>[ 30.461051] usb 2-4: reset full speed USB device using ohci_hcd and address 2<br>[ 30.487089] parport: PnPBIOS parport detected.<br>[ 30.487121] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]<br>
[ 30.692119] lirc_dev: lirc_register_plugin: sample_rate: 0<br>[ 30.696827] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb2:2<br>[ 30.696863] usbcore: registered new interface driver lirc_mceusb2<br>[ 30.952465] mantis_frontend_init (0): Probing for CU1216 (DVB-C)<br>
[ 30.954581] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TD<br>A10023) @ 0x0c<br>[ 30.954584] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend at<br>tach success<br>[ 30.954590] DVB: registering frontend 1 (Philips TDA10023 DVB-C)...<br>
[ 30.954776] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu No<br>v 9 17:35:27 PST 2006<br>[ 30.956655] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22<br>[ 30.956661] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (lev<br>
el, low) -> IRQ 22<br>[ 30.956683] PCI: Setting latency timer of device 0000:00:10.1 to 64<br>[ 31.512368] lp0: using parport0 (interrupt-driven).<br>[ 31.579263] /home/user/imon/imon_vfd.c: Driver for Soundgraph iMON VFD, v0.<br>
1a1<br>[ 31.579267] /home/user/imon/imon_vfd.c: Venky Raju <<a href="mailto:dev@venky.ws">dev@venky.ws</a>><br>[ 31.632597] /home/user/imon/imon_vfd.c: imon_probe: found IMON device<br>[ 31.634115] /home/user/imon/imon_vfd.c: imon_probe: iMON device on usb<2:3><br>
initialized<br>[ 31.634135] usbcore: registered new interface driver imon<br>[ 38.091485] mantis_ack_wait (0): Slave RACK Fail !<br>[ 38.161365] it87: Found IT8716F chip at 0x290, revision 1<br>[ 38.161376] it87: in3 is VCC (+5V)<br>
[ 38.161377] it87: in7 is VCCH (+5V Stand-By)<br>[ 38.313108] Adding 1951888k swap on /dev/disk/by-uuid/3aa3c26c-72d8-48e1-9811<br>-0381f0a69f84. Priority:-1 extents:1 across:1951888k<br>[ 38.464543] EXT3 FS on sda1, internal journal<br>
[ 38.788755] NET: Registered protocol family 10<br>[ 38.788858] lo: Disabled Privacy Extensions<br>[ 39.074026] kjournald starting. Commit interval 5 seconds<br>[ 39.074325] EXT3 FS on sda3, internal journal<br>[ 39.074329] EXT3-fs: mounted filesystem with ordered data mode.<br>
[ 166.753898] mantis start feed & dma<br>[ 166.754125] mantis stop feed and dma<br>[ 166.759769] mantis start feed & dma<br>[ 471.590289] mantis stop feed and dma<br>[ 471.731867] mantis start feed & dma<br>
[ 776.752261] mantis stop feed and dma<br>[ 776.828644] mantis start feed & dma<br>[ 1081.866319] mantis stop feed and dma<br>[ 1081.944235] mantis start feed & dma<br>[ 1386.916520] mantis stop feed and dma<br>
[ 1386.989831] mantis start feed & dma<br><br><br>I'm using the EIT-info, so MythTV is doing this EITScanner quite often to check for new channel-info, so that may be the root of the problem.<br><br>Here's a log from mythbackend.log just before the machine once again stopped responding:<br>
<br>2008-03-13 07:22:17.810 Reschedule requested for id -1.<br>2008-03-13 07:22:17.844 Scheduled 12 items in 0.0 = 0.01 match + 0.02 place<br>2008-03-13 07:22:17.848 scheduler: Last message repeated 3 times: Scheduled item<br>
s: Scheduled 12 items in 0.0 = 0.02 match + 0.02 place<br>2008-03-13 07:22:17.852 scheduler: Scheduled items: Scheduled 12 items in 0.0 =<br>0.01 match + 0.02 place<br>2008-03-13 07:22:47.305 EITScanner: Added 303 EIT Events<br>
2008-03-13 07:23:16.931 DVBTuning Warning: Invalid inversion, aborting, falling<br>back to 'auto'<br>2008-03-13 07:23:17.584 EITScanner: Now looking for EIT data on multiplex of cha<br>nnel 3<br>2008-03-13 07:25:53.206 EITScanner: Added 1 EIT Events<br>
2008-03-13 07:25:53.213 Reschedule requested for id -1.<br>2008-03-13 07:25:53.249 Scheduled 12 items in 0.0 = 0.02 match + 0.02 place<br>2008-03-13 07:25:53.253 scheduler: Scheduled items: Scheduled 12 items in 0.0 =<br>
0.02 match + 0.02 place<br><br><br>Br, Jarno<br><br>