<HTML>
<BR>
<BR>
<BR>
<BR>
<span style="font-weight: bold;">On Wed Dec 31 13:58 , "Devin Heitmueller" <devin.heitmueller@gmail.com> sent:<BR>
<BR>
</devin.heitmueller@gmail.com></span><blockquote style="border-left: 2px solid rgb(245, 245, 245); margin-left: 5px; margin-right: 0px; padding-left: 5px; padding-right: 0px;">On Tue, Dec 30, 2008 at 9:55 PM, <a href="javascript:top.opencompose('sonofzev@iinet.net.au','','','')">sonofzev@iinet.net.au</a><BR>
<<a href="javascript:top.opencompose('sonofzev@iinet.net.au','','','')">sonofzev@iinet.net.au</a>> wrote:<BR>
> Upgrade to latest hg...<BR>
><BR>
> Issue is still occurring.<BR>
><BR>
> I also noticed some other messages in dmesg that I didn't see before that<BR>
> hopefully may help.<BR>
><BR>
> cheers<BR>
> Allan<BR>
><BR>
> Here is the output..<BR>
><BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> zl10353_read_register: readreg error (reg=6, ret==-5)<BR>
> zl10353: write to reg 55 failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg 56 failed (err = -5)!<BR>
> zl10353: write to reg 5e failed (err = -5)!<BR>
> zl10353: write to reg 5c failed (err = -5)!<BR>
> zl10353: write to reg 64 failed (err = -5)!<BR>
> zl10353: write to reg cc failed (err = -5)!<BR>
> zl10353: write to reg 65 failed (err = -5)!<BR>
> zl10353: write to reg 66 failed (err = -5)!<BR>
> zl10353: write to reg 6c failed (err = -5)!<BR>
> zl10353: write to reg 6d failed (err = -5)!<BR>
> zl10353: write to reg 6e failed (err = -5)!<BR>
> zl10353: write to reg 6f failed (err = -5)!<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> zl10353_read_register: readreg error (reg=6, ret==-5)<BR>
> zl10353: write to reg 55 failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 4-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> zl10353_read_register: readreg error (reg=6, ret==-5)<BR>
> zl10353: write to reg 55 failed (err = -5)!<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg 56 failed (err = -5)!<BR>
> zl10353: write to reg 5e failed (err = -5)!<BR>
> zl10353: write to reg 5c failed (err = -5)!<BR>
> zl10353: write to reg 64 failed (err = -5)!<BR>
> zl10353: write to reg cc failed (err = -5)!<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> zl10353: write to reg 65 failed (err = -5)!<BR>
> zl10353: write to reg 66 failed (err = -5)!<BR>
> zl10353: write to reg 6c failed (err = -5)!<BR>
> zl10353: write to reg 6d failed (err = -5)!<BR>
> zl10353: write to reg 6e failed (err = -5)!<BR>
> zl10353: write to reg 6f failed (err = -5)!<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> zl10353_read_register: readreg error (reg=6, ret==-5)<BR>
> zl10353: write to reg 55 failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg ea failed (err = -5)!<BR>
> zl10353: write to reg 56 failed (err = -5)!<BR>
> zl10353: write to reg 5e failed (err = -5)!<BR>
> zl10353: write to reg 5c failed (err = -5)!<BR>
> zl10353: write to reg 64 failed (err = -5)!<BR>
> zl10353: write to reg cc failed (err = -5)!<BR>
> zl10353: write to reg 65 failed (err = -5)!<BR>
> zl10353: write to reg 66 failed (err = -5)!<BR>
> zl10353: write to reg 6c failed (err = -5)!<BR>
> zl10353: write to reg 6d failed (err = -5)!<BR>
> zl10353: write to reg 6e failed (err = -5)!<BR>
> zl10353: write to reg 6f failed (err = -5)!<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 4-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 4-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)<BR>
> xc2028 4-0061: -5 returned from send<BR>
> xc2028 4-0061: Error -22 while loading base firmware<BR>
> zl10353: write to reg 5f failed (err = -5)!<BR>
> zl10353: write to reg 71 failed (err = -5)!<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 4-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 3-0061: Incorrect readback of firmware version.<BR>
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456<BR>
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.<BR>
> xc2028 4-0061: Incorrect readback of firmware version.<BR>
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id<BR>
> 0000000000000000.<BR>
<BR>
Do me a favor and please stop top posting. It's a violation of list policy.<BR>
<BR>
Were those there before you upgraded to the latest hg?<BR>
<BR>
I suspect that perhaps the components are powered down, which is why<BR>
the i2c calls are failing. Very strange.<BR>
<BR>
-- <BR>
Devin J. Heitmueller<BR>
<a href="parse.pl?redirect=http%3A%2F%2Fwww.devinheitmueller.com" target="_blank"><span style="color: red;">http://www.devinheitmueller.com</span></a><BR>
AIM: devinheitmueller<BR>
)<BR>
<BR>
<BR>
------------------------------------------------------------------<BR>
Hi Devin<BR>
<BR>
<BR>
I did not see the messages before upgrading. However, I cannot confirm if they weren't there and I suspect they actually were. As the dmesg buffer is being constantly overwritten by these errors, and after more recent checks these more detailed messages aren't showing up any more. I believe I just missed them. <BR>
<BR>
I will also enable the timing messages in my next kernel build but this probably won't be for a couple of days. If I get a chance before NYE celebrations tonight I will disable the option in MythTV that releases the adaptors when not in use. I don't really need this option as there are no other TV applications that will access these tuners. I will also check for any powersaving options both in the kernel and in the PCIe configuration of the mobo. <BR>
<BR>
<BR>
cheers<BR>
<BR>
Allan<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</blockquote></HTML>
<BR>