[vdr] Hauppauge Nova-T DVB-T card problems

Andrew Herron totallymaxed at gmail.com
Wed Nov 2 12:09:51 CET 2005


Hi there,
 I am new to VDR and to DVB-T and I have been trying to configure VDR
1.3.34to work with 2 Hauppauge Nova-T DVB-T cards under Debian (kernel
2.6.13) and have run into some problems. Can someone confirm that the output
of dmesg (below) looks to be ok in respect of the NOVA-T cards?
 dmesg output;
 cx2388x v4l2 driver version 0.0.5 loaded
PCI: Found IRQ 5 for device 0000:02:0a.0
PCI: Sharing IRQ 5 with 0000:02:0a.2
PCI: Sharing IRQ 5 with 0000:02:0a.4
cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T
[card=18,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]: hauppauge eeprom: model=90002, tuner=76
cx88[0]: registered IR remote control
cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 5, latency: 64, mmio:
0xf4000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:02:0b.2
PCI: Sharing IRQ 11 with 0000:02:0b.4
cx88[1]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T
[card=18,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[1]: hauppauge eeprom: model=90002, tuner=76
cx88[1]: registered IR remote control
cx88[1]/0: found at 0000:02:0b.0, rev: 5, irq: 11, latency: 64, mmio:
0xf1000000
cx88[1]/0: registered device video1 [v4l2]
cx88[1]/0: registered device vbi1
cx2388x blackbird driver version 0.0.5 loaded
 When we run w_scan to generate channels.conf we get the following error;
 moon2:/tmp/w_scan# ./w_scan -o3 >> /var/lib/vdrdevel/channels.conf
Info: using DVB adapter auto detection.
Info: unable to open frontend /dev/dvb/adapter0/frontend0'
Info: unable to open frontend /dev/dvb/adapter1/frontend0'
Info: unable to open frontend /dev/dvb/adapter2/frontend0'
Info: unable to open frontend /dev/dvb/adapter3/frontend0'
main:1779: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
 Any help would be greatly appreciated.
 Thanks in advance.
 Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/vdr/attachments/20051102/254bd34b/attachment.htm


More information about the vdr mailing list