[vdr] VDR crash freezing computer !

michaelip at free.fr michaelip at free.fr
Fri Nov 4 10:52:54 CET 2005


Selon Jon Burgess <jburgess at uklinux.net>:

> michaelip at free.fr wrote:
> > Hello.
> >
> > Often when starting my computer, vdr crashes without any specific reason
> and
> > freezes the computer ! Nothing is possible/available on my comnputer ! I
> just
> > have to reset it !
>
> What version of the em8300 driver are you using?
> I think this issue might be fixed in the one of the recent releases from
> http://dxr3.sourceforge.net/download.html
>
> A problem was fixed where the interrupt handler was installed before the
> card was properly initialised and a stray interrupt from a card sharing
> the interrupt line would cause an oops.
>
> Disabling preempt option may help as well.
>
> The best place to follow up on this is probably the dxr3-devel mailing
> list, see http://sourceforge.net/mail/?group_id=5165
>
> 	Jon
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>



Hello.

My em8300 driver version is the 0.15.0 at least. Maybe I have the 0.15.1 but I'm
not sure, and I can't check right now ! If not, I will upgrade !

I also will remove the PREEMPT support in my kernel...
Many thanks for your help.




More information about the vdr mailing list