[vdr] disecq.conf and sources.conf in 1.3.45

Klaus Schmidinger Klaus.Schmidinger at cadsoft.de
Sun Mar 26 20:41:01 CEST 2006


Ville Skyttä wrote:
> Using the disecq.conf and sources.conf shipped with 1.3.45, I get these
> errors at startup:
> 
> Mar 26 20:53:30 bobcat vdr: [2556] loading /etc/vdr/sources.conf
> Mar 26 20:53:30 bobcat vdr: [2556] ERROR: unknown source key 'A'
> Mar 26 20:53:30 bobcat vdr: [2556] ERROR: error in /etc/vdr/sources.conf, line 168
> Mar 26 20:53:30 bobcat vdr: [2556] ERROR: (null): Bad address
> Mar 26 20:53:30 bobcat vdr: [2556] exiting
> 
> The offending entry appears to be "A111.1W Anik F2", should it be "S111..."?
> 
> Mar 26 20:54:57 bobcat vdr: [2623] loading /etc/vdr/diseqc.conf
> Mar 26 20:54:57 bobcat vdr: [2623] ERROR: unknown source 'S21.5E'
> Mar 26 20:54:57 bobcat vdr: [2623] ERROR: error in /etc/vdr/diseqc.conf, line 35
> Mar 26 20:54:57 bobcat vdr: [2623] ERROR: (null): Bad address
> Mar 26 20:54:57 bobcat vdr: [2623] exiting
> 
> S21.5E is no longer in the sources.conf shipped with 1.3.45.
> 
> I have only DVB-C here so I can happily just comment out the
> troublemakers, but from a packager point of view it'd be nice to know
> what's the correct fix for the above...

Change the 'A' to an 'S' in "A111.1W Anik F2".

The S21.5E entry in the default diseqc.conf is not active by
default, and serves just as an example.

Note to self: never accept a patch from a person who doesn't
provide a real name... .-(

Klaus



More information about the vdr mailing list