[vdr] VDR 1.5.4+ crashes

[vdr at digestive.jpl.se]

Hi!

Solved by upgrading fontconfig and freetype!

/Lars

On Sun, Dec 30, 2007 at 
12:02:06AM +0100, vdr at digestive.jpl.se wrote:
> Hi again!
> 
> One more thing that maybe has something to do with the the problem - I'm 
> having a HVR4000 and I'm running the new multiproto-driver patched with 
> HVR4000 support.
> 
> /Lars
> 
> On 
> Sat, Dec 29, 2007 at 11:43:24PM +0100, vdr at digestive.jpl.se wrote:
> > Hi!
> > 
> > I'm having a problem with that VDR version 1.5.4 and newer crashes as 
> > fast as I tries to start them. See below - I have read through the 
> > changelog but I have no idea what might cause my segfaults.
> > 
> > Dec 29 23:28:15 radiokaka vdr: [1078] VDR version 1.5.4 started
> > Dec 29 23:28:15 radiokaka vdr: [1078] codeset is 'ANSI_X3.4-1968' - 
> > unknown
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading plugin: 
> > ./PLUGINS/lib/libvdr-xine.so.1.5.4
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/setup.conf
> > Dec 29 23:28:15 radiokaka vdr: [1078] ERROR: unknown config parameter: 
> > MenuButtonCloses = 0
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/sources.conf
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/diseqc.conf
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/channels.conf
> > Dec 29 23:28:15 radiokaka vdr: [1078] loading /etc/vdr/svdrphosts.conf
> > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread 
> > started (pid=1078, tid=1079)
> > Dec 29 23:28:15 radiokaka vdr: [1079] video directory scanner thread 
> > ended (pid=1078, tid=1079)
> > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread 
> > started (pid=1078, tid=1080)
> > Dec 29 23:28:15 radiokaka vdr: [1080] video directory scanner thread 
> > ended (pid=1078, tid=1080)
> > Dec 29 23:28:15 radiokaka vdr: [1078] reading EPG data from 
> > /video/epg.data
> > Dec 29 23:28:15 radiokaka vdr: [1078] probing 
> > /dev/dvb/adapter0/frontend0
> > Dec 29 23:28:15 radiokaka vdr: [1082] tuner on device 1 thread started 
> > (pid=1078, tid=1082)
> > Dec 29 23:28:15 radiokaka vdr: [1083] section handler thread started 
> > (pid=1078, tid=1083)
> > Dec 29 23:28:15 radiokaka vdr: [1078] found 1 video device
> > Dec 29 23:28:15 radiokaka vdr: [1078] initializing plugin: xine (0.8.0): 
> > Software based playback using xine
> > Dec 29 23:28:15 radiokaka vdr: [1084] XineRemote control thread started 
> > (pid=1078, tid=1084)
> > Dec 29 23:28:15 radiokaka vdr: [1084] Entering cXineRemote thread
> > Dec 29 23:28:15 radiokaka vdr: [1078] setting primary device to 2
> > Dec 29 23:28:16 radiokaka vdr: [1078] assuming manual start of VDR
> > Dec 29 23:28:16 radiokaka vdr: [1078] SVDRP listening on port 2001
> > Dec 29 23:28:16 radiokaka vdr: [1078] setting current skin to "sttng"
> > Dec 29 23:28:16 radiokaka vdr: [1078] loading 
> > /etc/vdr/themes/sttng-default.theme
> > Dec 29 23:28:16 radiokaka vdr: [1078] starting plugin: xine
> > Dec 29 23:28:16 radiokaka vdr: [1078] ERROR: remote control XineRemote 
> > not ready!
> > Dec 29 23:28:16 radiokaka vdr: [1078] switching to channel 1
> > Dec 29 23:28:16 radiokaka vdr: [1088] transfer thread started (pid=1078, 
> > tid=1088)
> > Dec 29 23:28:16 radiokaka vdr: [1089] receiver on device 1 thread 
> > started (pid=1078, tid=1089)
> > Dec 29 23:28:16 radiokaka vdr: [1090] TS buffer on device 1 thread 
> > started (pid=1078, tid=1090)
> > Dec 29 23:28:16 radiokaka vdr[1078] general protection rip:2ac025871bc8 
> > rsp:7fff85923740 error:0
> > 
> > (it crashes without the xine-plugin as well)
> > 
> > I had the same problems with 1.5.3 before I copied arial.ttf and 
> > arialbd.ttf to /usr...truetype/
> > 
> > Thanks for any help,
> > 
> > Best regards Lars Fredriksson
> > 
> > _______________________________________________
> > vdr mailing list
> > vdr at linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
> 
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr