[vdr] Re: diseqc problem with Edision switch

[Ilariu Raducan]

By the way, the switch is Diseqc 2.0.
If I remove the cable going to the card and plug it back while channel is
set on the port #1 the reception works. After first diseqc command sent to
the switch it doesn't work anymore.

On 1/27/07, Ilariu Raducan <ilariu at gmail.com> wrote:
>
> Hi all,
>
> Could somebody help me with this one?
>
> I Got 2 Edision switches and 4 quad LNBs to use it with 3 receivers (I
> still have the old switch).
> With the old switch (not Edision) everything works OK.
> With Edision switches no channel locks, the signal is not stable. I
> presume the problem is with diseqc.conf.
>
> I used the following 2 files that work with the old switch but not with
> the new ones:
> diseq-ab.conf
> # port 1
> S5.0E  11700 V  9750  t v W15 [E0 10 23] W15 [E0 10 22] W15 t
> S5.0E  99999 V 10600  t v W15 [E0 10 23] W15 [E0 10 22] W15 T
> S5.0E  11700 H  9750  t V W15 [E0 10 23] W15 [E0 10 22] W15 t
> S5.0E  99999 H 10600  t V W15 [E0 10 23] W15 [E0 10 22] W15 T
>
> # port 2
> S13.0E  11700 V  9750  t v W15 [E0 10 23] W15 [E0 10 26] W15 t
> S13.0E   99999 V 10600  t v W15 [E0 10 23] W15 [E0 10 26] W15 T
> S13.0E  11700 H  9750  t V W15 [E0 10 23] W15 [E0 10 26] W15 t
> S13.0E  99999 H 10600  t V W15 [E0 10 23] W15 [E0 10 26] W15 T
>
> # port 3
> S16.0E  11700 V  9750  t v W15 [E0 10 27] W15 [E0 10 22] W15 t
> S16.0E  99999 V 10600  t v W15 [E0 10 27] W15 [E0 10 22] W15 T
> S16.0E  11700 H  9750  t V W15 [E0 10 27] W15 [E0 10 22] W15 t
> S16.0E  99999 H 10600  t V W15 [E0 10 27] W15 [E0 10 22] W15 T
>
> # port 4
> S19.2E   11700 V  9750  t v W15 [E0 10 27] W15 [E0 10 26] W15 t
> S19.2E  99999 V 10600  t v W15 [E0 10 27] W15 [E0 10 26] W15 T
> S19.2E  11700 H  9750  t V W15 [E0 10 27] W15 [E0 10 26] W15 t
> S19.2E  99999 H 10600  t V W15 [E0 10 27] W15 [E0 10 26] W15 T
>
> diseq-full.conf
> S5.0E  11700 V  9750  t v W15 [E0 10 38 F0]  W15 t
> S5.0E  99999 V 10600  t v W15 [E0 10 38 F1]  W15 T
> S5.0E  11700 H  9750  t V W15 [E0 10 38 F2]  W15 t
> S5.0E  99999 H 10600  t V W15 [E0 10 38 F3]  W15 T
>
> S13E  11700 V  9750  t v W15  [E0 10 38 F4]  W15 t
> S13E  99999 V 10600  t v W15  [E0 10 38 F5]  W15 T
> S13E  11700 H  9750 t V W15  [E0 10 38 F6]  W15 t
> S13E  99999 H 10600 t V W15  [E0 10 38 F7]  W15 T
>
>
> S16.0E  11700 V  9750  t v W15  [E0 10 38 F8]  W15 t
> S16.0E  99999 V 10600  t v W15  [E0 10 38 F9]  W15 T
> S16.0E  11700 H  9750  t V W15  [E0 10 38 FA]  W15 t
> S16.0E  99999 H 10600  t V W15  [E0 10 38 FB]  W15 T
>
> S19.2E  11700 V  9750  t v W15  [E0 10 38 FC] W15 t
> S19.2E  99999 V 10600  t v W15  [E0 10 38 FD]  W15 T
> S19.2E  11700 H  9750  t V W15  [E0 10 38 FE]  W15 t
> S19.2E  99999 H 10600  t V W15  [E0 10 38 FF]  W15 T
>
>
>
> Please help !!
>
> Thank you,
> Regards,
> Ilariu
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxtv.org/pipermail/vdr/attachments/20070128/989c6085/attachment.htm