[vdr] DVB-T card on the move

Theunis Potgieter theunis.potgieter at gmail.com
Tue Feb 5 05:13:55 CET 2008


udev rules

On 05 Feb 2008 00:27:00 +0100, Rainer Zocholl
<UseNet-Posting-Nospam-74308- at zocki.toppoint.de> wrote:
> Hello
>
> for years i was running VDR 1.4.3.
>
> Now i felt forced to use ctvdr and 1.4.7 with a
> Linux 2.6.23x2 #2 SMP PREEMPT on a
> Main Board: K7S8XE+ AMI BIOS  P1.70 (04/27/2004)
> and an AMD Duron(tm) 1350MHz (under clocked from 1500)
> with 512MB RAM
>
>
> i found this miracle(?):
>
> The systen has 4 cards:
>
> vdr:~# dmesg | grep -i frontend
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
> DVB: registering frontend 1 (ST STV0299 DVB-S)...
> DVB: registering frontend 2 (ST STV0299 DVB-S)...
> DVB: registering frontend 3 (ST STV0299 DVB-S)...
>
> with setup.conf
>
> PrimaryDVB = 2
>
> i got sound and live screen
>
> After a slight (benign) change reboot i have
> no live image and no sound anymore.
> Panic!
> What happend?
>
>
>
>
>
>
> vdr:~# dmesg | grep front
> DVB: registering frontend 0 (ST STV0299 DVB-S)...
> DVB: registering frontend 1 (ST STV0299 DVB-S)...
> DVB: registering frontend 2 (ST STV0299 DVB-S)...
> DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
>
> Mystery...
> another warm reboot without any change:
>
> vdr:~# dmesg | grep front
> DVB: registering frontend 0 (ST STV0299 DVB-S)...
> DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
> DVB: registering frontend 2 (ST STV0299 DVB-S)...
> DVB: registering frontend 3 (ST STV0299 DVB-S)...
>
>
> And again:
>
> vdr:~# dmesg | grep front
> DVB: registering frontend 0 (ST STV0299 DVB-S)...
> DVB: registering frontend 1 (ST STV0299 DVB-S)...
> DVB: registering frontend 2 (ST STV0299 DVB-S)...
> DVB: registering frontend 3 (Zarlink MT352 DVB-T)...
>
>
>
> vdr:~# lspci
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
> 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
> 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
> 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
> 00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
> 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
> 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
> 00:05.0 RAID bus controller: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA  [SiS] (rev 01)
> 00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
> 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev11)
> 00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> 00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 85)
> vdr:~#
>
>
> So how can i "nail" this moving DVB-T card to a fixed postition?
>
>
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>



More information about the vdr mailing list