[vdr] + DVB-S2 + reelchannelscan 0.6.1 patch for vdr-1.7.0 + h264
Goga777
goga777 at bk.ru
Sat May 31 22:37:56 CEST 2008
> For transponders 11258, 11278 , 11449 I get no channels as well.
why ?
(may be this dvb-s2 channel was founded by VDR-scan, not by reelchannelscan ?)
> But for 11996 I get:
> NationalGeo
> HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0
> Next
> HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0
> SKY Cinema
> HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0
> SKY Sport HD
> 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0
> SKY Sport HD
> 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0
>
> I also get:
> HBO HD test;Cyfrowy Polsat
> S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0
> HD suisse;SRG SSR idee
> suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0
> Polsat Sport HD test;Cyfrowy Polsat
> S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0
>
> which are HD channels but DVB-S.
dvb-s channels are not so interesting than dvb-s2 :)
>
> As far as your transponder file, what if you remove S2 from the end of
> the line describing the transponder? I have used the original S13.0E.tpl
> that I found in an old 0.4.1 package. Anyway, in my code I treat each
> transponder as DVB-S and DVB-S2, so try again and post back. This is my
> corresponding lines:
> 1=11258,H,27500,23
> 2=11278,V,27500,34
> 3=11449,H,27500,23
> 4=11996,V,27500,23
no luck with your variant
[SATTYPE]
1=S13.0E
2=Hot Bird 6/7A/8 [Ku DVB-S2]
3=East
4=13.0
[DVB]
0=4
1=11258,H,27500,23
2=11278,V,27500,34
3=11449,H,27500,23
4=11996,V,27500,23
debug [scan] Stop Replay Card Number 0 SET DEBUG [scan.c] scanning_on_receiving_device TRUE
DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++
DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++
DEBUG [channelscan]: scan f: 11258
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 0
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ----------
DEBUG [channelscan]: scan f: 11278
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 0
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ----------
DEBUG [channelscan]: scan f: 11449
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 0
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ----------
DEBUG [channelscan]: scan f: 11996
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 0
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
DEBUG [cs]: ScanDVB_S2
DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4
44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648
debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ----------
--- End of transponderlist. End of scan! Duratation 48 ---
Assumed HD Transponders
Goga
>
> Goga777 wrote:
> > Приветствую, Vangelis
> >
> >
> > it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
> >
> > [SATTYPE]
> > 1=S13.0E
> > 2=Hot Bird 6/7A/8 [Ku DVB-S2]
> > 3=East
> > 4=13.0
> >
> > [DVB]
> > 0=4
> > 1=11258,H,27500,23,S2
> > 2=11278,V,27500,23,S2
> > 3=11449,H,27500,23,S2
> > 4=11996,V,27500,23,S2
> >
> >
> > I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
> >
> > May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
> > May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
> > May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E"
> > May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open
> > LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
> > May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1
> > May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0
> > May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0
> > May 31 23:02:55 localhost last message repeated 2 times
> > May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 ---
> > May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535)
> > May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used
> > May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1
> > May 31 23:02:55 localhost vdr: [6613] maxmods = 3
> > May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1
> > May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537)
> > May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used
> > May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536)
> > May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258
> > ------------- May 31 23:03:01 localhost last message repeated 2 times
> > May 31 23:03:01 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258
> > ------------- May 31 23:03:07 localhost last message repeated 2 times
> > May 31 23:03:07 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278
> > ------------- May 31 23:03:13 localhost last message repeated 2 times
> > May 31 23:03:13 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278
> > ------------- May 31 23:03:19 localhost last message repeated 2 times
> > May 31 23:03:19 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449
> > ------------- May 31 23:03:25 localhost last message repeated 2 times
> > May 31 23:03:25 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449
> > ------------- May 31 23:03:31 localhost last message repeated 2 times
> > May 31 23:03:31 localhost vdr: [6613] maxmods = 3
> >
> > May 31 23:03:37 localhost last message repeated 2 times
> > May 31 23:03:37 localhost vdr: [6613] maxmods = 3
> > May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996
> > ------------- May 31 23:03:43 localhost last message repeated 2 times
> > May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996
> > May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> > May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument
> > May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
> >
> >
> > there's some strange warnings - can somebody comment their
> >
> > May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
> > May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists
> > May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E"
> > May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open
> > LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
> >
> >
> > Goga777
> >
> >
> >
> >> I tested it with automatic scan (dont know if manual scan works).
> >> Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up
> >> both DVB-S AND DVB-S2 channels.
> >>
> >
> > I did so with my S13.0E.tpl
> >
> >
> >> I haven't done any more testing with
> >> other parameters. I have Hotbird in my installation and it picked up
> >> in total 1626 services (TV+Radio). Maybe it missed a few (my satellite
> >> box gets about 2050, but this number includes data services). Moreover I
> >> dont know whether the file with the transponders for Hotbird (
> >> (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it
> >> is missing a few transponders.
> >>
> >
> > in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time
> > for dvb-s2 tests
> >
> > [SATTYPE]
> > 1=S13.0E
> > 2=Hot Bird 6/7A/8 [Ku DVB-S2]
> > 3=East
> > 4=13.0
> >
> > [DVB]
> > 0=4
> > 1=11258,H,27500,23,S2
> > 2=11278,V,27500,23,S2
> > 3=11449,H,27500,23,S2
> > 4=11996,V,27500,23,S2
> >
> > (for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
More information about the vdr
mailing list