[vdr] Can't use both my cards at once

[Simon Baxter]

> I've found a big problem: VDR can't use both my DVB cards at once.
> They're both Hauppauge cards using the saa7146 module (I'm not sure if
> they both use the budget* modules though), but one is DVB-S and one is
> DVB-T. I expect it's because they're both based on the same chipset
> that's confusing VDR. Is there a fix available? I'm using 1.6.0-11 from
> Debian, patched for Freesat and rebuilt, but I'm willing to try 1.7.* if
> that's what it takes.


What does your channels.conf look like?

Sounds odd - I'm using the saa7146 driver on 2 cards (although both 
Technotrend)