[vdr] Restricting a particular dvb card from tuning to channels with a selected modulation

abbe normal 1abenormal at gmail.com
Fri Oct 30 02:38:28 CET 2009


hello guys

yes i do think this is a good idea...
as with different tuners they could be used for other lnbs like c -band and ku
i could only use my s2/s card for services on a c and ku setup then
tune and record from different types of services...
then each tuner could live on a fixed satellite if you wanted

On 10/29/09, Timothy D. Lenz <tlenz at vorgon.com> wrote:
> There is the isue whereone tunner might be connected to an LNB on a rotor
> and another to a fixed. Knowing how the tunner can tune
> wouldn't help then.
>
> ----- Original Message -----
> From: "Klaus Schmidinger" <Klaus.Schmidinger at tvdr.de>
> To: <vdr at linuxtv.org>
> Sent: Thursday, October 29, 2009 1:13 AM
> Subject: Re: [vdr] Restricting a particular dvb card from tuning to channels
> with a selected modulation
>
>
>> On 10/28/09 23:15, Petri Helin wrote:
>> > Hi,
>> >
>> > I have an USB DVB-C card (Reddo dvb-c, actually a relabelled Tongshi
>> > box), which works very well with the current Linux driver excluding
>> > channels with QAM-256 modulation. Would it be easy to check
>> > FE_CAN_QAM_256 in vdr before trying to use a device to tune to a
>> > particular channel? In such a case I could deactivate FE_CAN_QAM_256 in
>> > the drivers. I am using VDR 1.7.9, if it makes a difference.
>>
>> Checking the frontend capabilities is certainly the right thing to do,
>> and I will see that this gets implemented.
>>
>> Klaus
>>
>> _______________________________________________
>> vdr mailing list
>> vdr at linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
>
> _______________________________________________
> vdr mailing list
> vdr at linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>



More information about the vdr mailing list