Hauppauge WinTV-HVR-1250
This article is a stub or is incomplete. |
This article requires expansion. Please help add informative information if you can. |
An ATSC PCIe card from Hauppauge.
Support for the WinTV-HVR-1250 card's digital TV reception capabilities (8-VSB & 64/256-QAM) is currently provided within the latest drivers from the LinuxTV Hg repository, and should make its way into the 2.6.24 kernel. Analog support will be added in the near future, but it will likely be too late for inclusion into 2.6.24.
Overview/Features
Discuss the features and facets of the device here ... this means you
The HVR-1250 is also known by its codename Coram.
Components Used:
- ? (tuner for analog ... likely a NXP/Philips TDA18271)
- Microtune MT2131 (tuner for digital)
- NXP/Philips TDA8295 (analog IF demodulator)
- Samsung S5H1409/Conexant CX24227 (digital demodulator)
- Conexant CX23887 (A/V Decoder & PCIe bridge)
Identification
provide the relevant output of lspci -vvn or, in the case of usb devices, lsusb -v here ...we're particularly interested in the subsystem IDs ... this means you
It has a Subsystem ID of 0x7911.
lspci -vvnn gives
03:00.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:8852] (rev 02) Subsystem: Hauppauge computer works Inc. Unknown device [0070:7911] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fce00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Vital Product Data <?> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
Other Images
use the included code to insert other images if necessary ...
- Filename
description
- Filename
description
- ...
Making it Work
Firmware
is there any firmware specific information for this device? if so, list it here ... this means you
Drivers
provide the details of where the drivers and patches and necessary tools are available ... this means you
Sample kernel output
provide the relevant portion of dmesg here
Remote Control Support
discuss support for the remote control here
External Links
provide a link to the vendor's product page here ... along with any other external link to information that is generally helpful in relation to the device