AVerMedia AVerTVHD Volar (A868R): Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
m (minor edits)
Line 6: Line 6:


==Overview/Features==
==Overview/Features==
This device supports ATSC (i.e. OTA Digital TV) only. A pig-tail(included) connects the device's mini-rf connector to standard coax cable.
This device supports ATSC (i.e. OTA Digital TV) only. A pig-tail (included) connects the device's mini-RF connector to standard coax cable.


===Components Used===
===Components Used===
Line 31: Line 31:


==Other Notes==
==Other Notes==
This card seems to be universally on clearance and/or significantly marked down on both auction and common retailer's sites. Perhaps discontinued?
(As of Dec 2008) This device seems to be universally on clearance and/or significantly marked down on both auction and common retailer's sites. Perhaps discontinued?


==External Links==
==External Links==

Revision as of 00:15, 22 December 2008

AVerMedia A868R Case
AVerMedia A868R PCB

An ATSC USB 2.0 device from AVerMedia.

It is supported under Linux since kernel 2.6.27 [1]

Overview/Features

This device supports ATSC (i.e. OTA Digital TV) only. A pig-tail (included) connects the device's mini-RF connector to standard coax cable.

Components Used

  • MXL5003S tuner
  • LG DT3303 demodulator
  • Cypress FX2LP (CY7C68013A)

Identification

From lsusb: ID 07ca:a868 AVerMedia Technologies, Inc. Tested device was in a opaque metallic black case. AVerMedia's website shows a unit with a translucent blue case that may differ.

Making it work

Using a kernel > 2.6.27, required modules are:

  • dvb_core
  • dvb_usb
  • dvb_usb_cxusb
  • lgdt330x
  • mxl5005s

No firmware is needed, the EZUSB chip appears to load via I2C from an EEPROM. Device must be connected to a USB 2.0 port to function.

Other Notes

(As of Dec 2008) This device seems to be universally on clearance and/or significantly marked down on both auction and common retailer's sites. Perhaps discontinued?

External Links