Anysee E30C Plus: Difference between revisions
Jump to navigation
Jump to search
(some clean ups) |
(revisions based on photos taken by Timo (link to them was posted on m/l)) |
||
| Line 1: | Line 1: | ||
An [[DVB-C]] [[DVB-C USB Devices|USB 2.0 device]] from [[Anysee]]. |
An [[DVB-C]] [[DVB-C USB Devices|USB 2.0 device]] from [[Anysee]]. |
||
Like other devices from Anysee bearing "Plus" in their product name, a smart card interface is present. |
|||
Looks like support for DVB-C version should be added to cxusb, since from the photos it looks like Conexant USB 2.0 reference design (source: IRC logs). Has two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM, which are needed for analog video (cx2584x/MAKO) only. |
|||
==Components Used== |
|||
* Samsung DTOS403IH102A (tuner module) |
|||
** ? (tuner IC) |
|||
** ? (analog IF demodulator) |
|||
* Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be |
|||
* NXP/Philips TDA10023HT (digital demodulator) |
|||
* ? (decoder) .... its a 32pin IC ... meaning its NOT the cx23453 as earlier reported |
|||
* Cypress CY7C63108A (i.e. FX2LP) (USB bridge) |
|||
* PIC16LF7 (?) ... likely for external audio input or handling of remote control |
|||
Looks like support for DVB-C version should be added to dvb-usb-cxusb ... although the firmware API is different. (<-- source ?). |
|||
In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM. These are needed for analog video (<-- source?). |
|||
The device hardware might be similar to those supported by dvb-usb-cxusb, but the firmware API is different. |
|||
==External Links== |
==External Links== |
||
Revision as of 17:21, 17 September 2007
An DVB-C USB 2.0 device from Anysee.
Like other devices from Anysee bearing "Plus" in their product name, a smart card interface is present.
Components Used
- Samsung DTOS403IH102A (tuner module)
- ? (tuner IC)
- ? (analog IF demodulator)
- Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be
- NXP/Philips TDA10023HT (digital demodulator)
- ? (decoder) .... its a 32pin IC ... meaning its NOT the cx23453 as earlier reported
- Cypress CY7C63108A (i.e. FX2LP) (USB bridge)
- PIC16LF7 (?) ... likely for external audio input or handling of remote control
Looks like support for DVB-C version should be added to dvb-usb-cxusb ... although the firmware API is different. (<-- source ?).
In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM. These are needed for analog video (<-- source?).