Compro Videomate C200: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
Line 55: Line 55:


==Making it Work==
==Making it Work==
''Not working in Linux''
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''

===Firmware===
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''

===Drivers===
''Provide the details of where the drivers and patches and necessary tools are available.''


===Sample Kernel Output===
===Sample Kernel Output===
dmesg doesn't show any new line with <code>dmesg | tail -f</code> when the device is plugged.
''Provide the '''relevant''' portion of dmesg here. For example:''<br>
# dmesg
[ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000
[ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected]
[ 45.569753] saa7130[0]: board init: gpio is 843f00
[ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7
[ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff
[ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff
[ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb
[ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom
[ 45.755532] saa7130[0]: registered device video0 [v4l2]
[ 45.755550] saa7130[0]: registered device vbi0
[ 45.873425] saa7134 ALSA driver for DMA sound loaded
[ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2
[ 45.943354] saa7130[0]/dvb: frontend initialization failed

===Remote Control Support===
''Discuss support for the remote control here.''


==External Links==
==External Links==

Revision as of 18:45, 7 November 2009

I'M WORKING ON THIS PAGE... INFORMATION IS NOT OK

C200 USB Stick

An analog acquisition usb stick from Compro

No Linux support right now (07/11/2009)

Overview/Features

Features :

  • Outputs : USB interface, nice for laptops
  • Inputs: S-Video and RCA
  • Software : Only XP and Vista only and very heavy Ulead software which doesn't run on Virtualbox (brrr)

Components Used

List the hardware modules used by the device:

  • Trident USB 2.0 Video Processors

Win Driver sample

[c200Vid.AddReg.NTamd64]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,U2800Vid64.sys
HKR,,PageOutWhenUnopened,3,01
HKR,,DontSuspendIfStreamsAreRunning,3,01

;HKLM,%MediaInterfaces%\{E65084D3-29F6-4ac6-9CD3-2B2D58FF6403},,,"Analog Copy Protection Notifier"
;HKLM,%MediaInterfaces%\{E65084D3-29F6-4ac6-9CD3-2B2D58FF6403},IID,1,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

HKLM,Software\Tridvid\Tuner,Name,0,"LG Z200T"
HKLM,Software\Tridvid\Tuner,Type,0x00010001,0

HKLM,Software\Tridvid\IRDecoderType,Name,0,"NEC Decoder"
HKLM,Software\Tridvid\IRDecoderType,Type,0x00010001,0

Identification

# lsusb -v

Bus 001 Device 009: ID 185b:0200 Compro 
Device Descriptor:                      
  bLength                18             
  bDescriptorType         1             
  bcdUSB               2.00             
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                             
  bDeviceProtocol         0                             
  bMaxPacketSize0        64                             
  idVendor           0x185b Compro                      
  idProduct          0x0200                             
  bcdDevice            0.01                             
  iManufacturer          16 Compro                      
  iProduct               32 VM C200                     
  iSerial                64 �                           
  bNumConfigurations      1

Making it Work

Not working in Linux

Sample Kernel Output

dmesg doesn't show any new line with dmesg | tail -f when the device is plugged.

External Links

Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:


Finally, add anything else that you think might be relevant under an appropriate heading.

Very last thing is add a catergory. (Remove the nowiki tags). For example
[[Category:DVB-T PCI Devices]]