DViCO FusionHDTV DVB-T Dual Express2: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Image:dvicoDualExpress2PCB.jpg|thumb|250px|right|DVico Fusion HDTV Dual Express PCB showing component labels]]
[[Image:DualExpress2Front.JPG|thumb|250px|right|DVico Fusion HDTV Dual Express2 PCB showing component labels (give or take poor photography)]]
A new revision of a [[hybrid]] [[DVB-T]] [[DVB-T PCIe Cards|PCIe card]] from [[DViCO]].
A new revision of a [[hybrid]] [[DVB-T]] [[DVB-T PCIe Cards|PCIe card]] from [[DViCO]].


Line 11: Line 11:
===Components Used===
===Components Used===


Tuners x2:
Text for components not legible in main image:<BR>
<pre>DIBcom
The Heart of Mobile TV
7070PB1-AXGXba-G-b
DVB
KNKM6
D4W91.1
1018-1010-C</pre>


A/V Decoder:
===Identification===
<pre>CONEXANT
00:00.0 0500: 10de:03ea (rev a1)
PCIe A/V Decoder
Subsystem: 1458:5001
CX23885-152
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Pf1R1751A
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
1004 CN</pre>
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000


Silver Oval Thing (Bottom Left):
00:01.0 0601: 10de:03e0 (rev a2)
<pre>28.636360
Subsystem: 1458:0c11
KONY 1021 </pre>
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0


Silver Oval Thing (Top Right):
00:01.1 0c05: 10de:03eb (rev a2)
<pre>4.000000
Subsystem: 1458:0c11
KONY 0816</pre>
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b800 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus


Black Thing w/3 Solder Pads (Top Left):
00:01.2 0500: 10de:03f5 (rev a2)
<pre>FR1117-3.3
Subsystem: 1458:0c11
MA09</pre>
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-


Black Thing w/3 Solder Pads (Top Right):
00:02.0 0c03: 10de:03f1 (rev a2) (prog-if 10 [OHCI])
<pre>FR1117-1.8
Subsystem: 1458:5004
C949</pre>
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9204000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd


Black Thing w/3 Solder Pads (Bottom Left):
00:02.1 0c03: 10de:03f2 (rev a2) (prog-if 20 [EHCI])
<pre>FR1117-1.2
Subsystem: 1458:5004
CA02</pre>
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f9205000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd


Chip Directly Above CX Decoder:
00:04.0 0604: 10de:03f3 (rev a1) (prog-if 01 [Subtractive decode])
<pre>PIC16F73-1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
755<symbol> (first number could be a 7, 1 or /)
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
<symbol>1015K45</pre>
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: f3000000-f6ffffff
Prefetchable memory behind bridge: 80000000-800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat+ DiscTmrSERREn-
Capabilities: [b8] Subsystem: 10de:cb84
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000


<br>
00:05.0 0403: 10de:03f0 (rev a2)
Subsystem: 1458:a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f9200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel


===Identification===
00:06.0 0101: 10de:03ec (rev a2) (prog-if 8a [Master SecP PriP])
02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
Subsystem: 1458:5002
Subsystem: DViCO Corporation Device [18ac:db98]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Flags: fast devsel, IRQ 16
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Memory at f9000000 (64-bit, non-prefetchable) [size=2M]
Latency: 0 (750ns min, 250ns max)
Capabilities: [40] Express Endpoint, MSI 00
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Capabilities: [80] Power Management version 2
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Capabilities: [90] Vital Product Data
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Capabilities: [100] Advanced Error Reporting
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [200] Virtual Channel
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd

00:07.0 0680: 10de:03ef (rev a2)
Subsystem: 1458:e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f9206000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at bc00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
Address: 00000000fee0300c Data: 4189
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth

00:08.0 0101: 10de:03f6 (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: 1458:b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: Memory at f9207000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv

00:08.1 0101: 10de:03f6 (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: 1458:b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at f9208000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv

00:0c.0 0604: 10de:03e9 (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f9000000-f91fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: 10de:0000
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=WRR32
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport

00:0d.0 0300: 10de:03d0 (rev a2) (prog-if 00 [VGA controller])
Subsystem: 1458:d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f7000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 80100000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: nouveau

00:18.0 0600: 1022:1100
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-

00:18.1 0600: 1022:1101
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 0600: 1022:1102
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 0600: 1022:1103
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp

01:06.0 0104: 1095:3114 (rev 02)
Subsystem: 1095:7114
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at f6005000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 80000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sata_sil

01:07.0 0400: 14f1:8800 (rev 05)
Subsystem: 18ac:db11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
No end tag found
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx8800

01:07.2 0480: 14f1:8802 (rev 05)
Subsystem: 18ac:db11
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager

01:0e.0 0c00: 104c:8024 (prog-if 10 [OHCI])
Subsystem: 1458:1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f6004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

02:00.0 0400: 14f1:8852 (rev 04)
Subsystem: 18ac:db98
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f9000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-


===Other images===
===Other images===
<gallery perrow=5>
<gallery perrow=5>
Image:DualExpress2-Front.JPG|Dvico Dual express2 showing front side detail
Image:DualExpress2Bracket.JPG|Dvico Dual express2 showing mounting backplate
Image:KONY.1021.JPG|KONY.1021 Between CX23885 & DiBcom 7070
Image:KONY.0733.JPG|KONY.0733 & PIC16F73-I above CX23885
Image:DualExpress2Front-bottom-right-IC.JPG|Front bottom right of card
Image:DualExpress2Front-top-center-IC.JPG
Image:DualExpress2-Back.JPG|Dvico Dual express2 showing backside detail
Image:DualExpress2-TF12000-Back.JPG|Towards the lower right backside of the card
Image:DualExpress2Back-ICs.JPG|Some IC's on the top left backside of the card
</gallery>
</gallery>


==Making it Work==
==Making it Work==
According to http://www.linuxtv.org/wiki/index.php/DiBcom_DiB7xxx the DB7070 has a DIB0070 RF tuner with DIB7000 demodulator.

I was able to get the CX23885 to load 2 front ends (that dont work) and the DIB7000 using a hybrid of Hauppauge WinTV-HVR1400 & DViCO FusionHDTV DVB-T Dual Express settings. I dont know who to work the DIB0070 (I guess I need to replace the xc2028 references)......
===Firmware===
===Firmware===


Line 396: Line 88:


===Sample kernel output===
===Sample kernel output===
[ 5196.348846] cx23885 0000:02:00.0: PCI INT A disabled
[ 8643.871673] cx23885 driver version 0.0.2 loaded
[ 8643.871787] cx23885 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 8643.871793] cx23885[0]: Your board isn't known (yet) to the driver.
[ 8643.871795] cx23885[0]: Try to pick one of the existing card configs via
[ 8643.871796] cx23885[0]: card=<n> insmod option. Updating to the latest
[ 8643.871797] cx23885[0]: version might help as well.
[ 8643.871800] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 8643.871803] cx23885[0]: card=0 -> UNKNOWN/GENERIC
[ 8643.871805] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 8643.871807] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
[ 8643.871809] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
[ 8643.871812] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
[ 8643.871814] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 8643.871816] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
[ 8643.871818] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200
[ 8643.871821] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700
[ 8643.871823] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400
[ 8643.871825] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express
[ 8643.871828] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express
[ 8643.871830] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H
[ 8643.871832] cx23885[0]: card=13 -> Compro VideoMate E650F
[ 8643.871835] cx23885[0]: card=14 -> TurboSight TBS 6920
[ 8643.871837] cx23885[0]: card=15 -> TeVii S470
[ 8643.871839] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005
[ 8643.871841] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI
[ 8643.871843] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270
[ 8643.871845] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275
[ 8643.871848] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255
[ 8643.871850] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210
[ 8643.871852] cx23885[0]: card=22 -> Mygica X8506 DMB-TH
[ 8643.871855] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2
[ 8643.871857] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850
[ 8643.871859] cx23885[0]: card=25 -> Compro VideoMate E800
[ 8643.871861] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290
[ 8643.871864] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH
[ 8643.871866] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200
[ 8643.871994] CORE cx23885[0]: subsystem: 18ac:db98, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 8643.999174] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 8643.999182] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf9000000
[ 8643.999190] cx23885 0000:02:00.0: setting latency timer to 64


===Remote Control Support===
===Remote Control Support===

Latest revision as of 04:41, 18 April 2011

DVico Fusion HDTV Dual Express2 PCB showing component labels (give or take poor photography)

A new revision of a hybrid DVB-T PCIe card from DViCO.

The previous revision (Dual Express) has DVB support in mercurial, but not in the mainline kernel. This revision is not currently identified correctly in linux.

Overview/Features

Able to deliver one analogue channel and one digital channel simultaneously or 2 digital channels. High definition resolution is 1920 x 1080. Features a power switch pass-through to allow it to turn the host system on automatically.

Components Used

Tuners x2:

DIBcom
The Heart of Mobile TV
7070PB1-AXGXba-G-b
DVB
KNKM6
D4W91.1
1018-1010-C

A/V Decoder:

CONEXANT
PCIe A/V Decoder
CX23885-152
Pf1R1751A
1004 CN

Silver Oval Thing (Bottom Left):

28.636360
KONY 1021 

Silver Oval Thing (Top Right):

4.000000
KONY 0816

Black Thing w/3 Solder Pads (Top Left):

FR1117-3.3
MA09

Black Thing w/3 Solder Pads (Top Right):

FR1117-1.8
C949

Black Thing w/3 Solder Pads (Bottom Left):

FR1117-1.2
CA02

Chip Directly Above CX Decoder:

PIC16F73-1
755<symbol> (first number could be a 7, 1 or /)
<symbol>1015K45


Identification

       02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
       Subsystem: DViCO Corporation Device [18ac:db98]
       Flags: fast devsel, IRQ 16
       Memory at f9000000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express Endpoint, MSI 00
       Capabilities: [80] Power Management version 2
       Capabilities: [90] Vital Product Data
       Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
       Capabilities: [100] Advanced Error Reporting
       Capabilities: [200] Virtual Channel

Other images

Making it Work

According to http://www.linuxtv.org/wiki/index.php/DiBcom_DiB7xxx the DB7070 has a DIB0070 RF tuner with DIB7000 demodulator. I was able to get the CX23885 to load 2 front ends (that dont work) and the DIB7000 using a hybrid of Hauppauge WinTV-HVR1400 & DViCO FusionHDTV DVB-T Dual Express settings. I dont know who to work the DIB0070 (I guess I need to replace the xc2028 references)......

Firmware

Drivers

Sample kernel output

       [ 5196.348846] cx23885 0000:02:00.0: PCI INT A disabled
       [ 8643.871673] cx23885 driver version 0.0.2 loaded
       [ 8643.871787] cx23885 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
       [ 8643.871793] cx23885[0]: Your board isn't known (yet) to the driver.
       [ 8643.871795] cx23885[0]: Try to pick one of the existing card configs via
       [ 8643.871796] cx23885[0]: card=<n> insmod option.  Updating to the latest
       [ 8643.871797] cx23885[0]: version might help as well.
       [ 8643.871800] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
       [ 8643.871803] cx23885[0]:    card=0 -> UNKNOWN/GENERIC
       [ 8643.871805] cx23885[0]:    card=1 -> Hauppauge WinTV-HVR1800lp
       [ 8643.871807] cx23885[0]:    card=2 -> Hauppauge WinTV-HVR1800
       [ 8643.871809] cx23885[0]:    card=3 -> Hauppauge WinTV-HVR1250
       [ 8643.871812] cx23885[0]:    card=4 -> DViCO FusionHDTV5 Express
       [ 8643.871814] cx23885[0]:    card=5 -> Hauppauge WinTV-HVR1500Q
       [ 8643.871816] cx23885[0]:    card=6 -> Hauppauge WinTV-HVR1500
       [ 8643.871818] cx23885[0]:    card=7 -> Hauppauge WinTV-HVR1200
       [ 8643.871821] cx23885[0]:    card=8 -> Hauppauge WinTV-HVR1700
       [ 8643.871823] cx23885[0]:    card=9 -> Hauppauge WinTV-HVR1400
       [ 8643.871825] cx23885[0]:    card=10 -> DViCO FusionHDTV7 Dual Express
       [ 8643.871828] cx23885[0]:    card=11 -> DViCO FusionHDTV DVB-T Dual Express
       [ 8643.871830] cx23885[0]:    card=12 -> Leadtek Winfast PxDVR3200 H
       [ 8643.871832] cx23885[0]:    card=13 -> Compro VideoMate E650F
       [ 8643.871835] cx23885[0]:    card=14 -> TurboSight TBS 6920
       [ 8643.871837] cx23885[0]:    card=15 -> TeVii S470
       [ 8643.871839] cx23885[0]:    card=16 -> DVBWorld DVB-S2 2005
       [ 8643.871841] cx23885[0]:    card=17 -> NetUP Dual DVB-S2 CI
       [ 8643.871843] cx23885[0]:    card=18 -> Hauppauge WinTV-HVR1270
       [ 8643.871845] cx23885[0]:    card=19 -> Hauppauge WinTV-HVR1275
       [ 8643.871848] cx23885[0]:    card=20 -> Hauppauge WinTV-HVR1255
       [ 8643.871850] cx23885[0]:    card=21 -> Hauppauge WinTV-HVR1210
       [ 8643.871852] cx23885[0]:    card=22 -> Mygica X8506 DMB-TH
       [ 8643.871855] cx23885[0]:    card=23 -> Magic-Pro ProHDTV Extreme 2
       [ 8643.871857] cx23885[0]:    card=24 -> Hauppauge WinTV-HVR1850
       [ 8643.871859] cx23885[0]:    card=25 -> Compro VideoMate E800
       [ 8643.871861] cx23885[0]:    card=26 -> Hauppauge WinTV-HVR1290
       [ 8643.871864] cx23885[0]:    card=27 -> Mygica X8558 PRO DMB-TH
       [ 8643.871866] cx23885[0]:    card=28 -> LEADTEK WinFast PxTV1200
       [ 8643.871994] CORE cx23885[0]: subsystem: 18ac:db98, board: UNKNOWN/GENERIC [card=0,autodetected]
       [ 8643.999174] cx23885_dev_checkrevision() Hardware revision = 0xa5
       [ 8643.999182] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf9000000
       [ 8643.999190] cx23885 0000:02:00.0: setting latency timer to 64

Remote Control Support

Have not attempted using remote with this card. Remote works ok with the USB receiver from a DVICO DVB-T Plus (slightly different repeat timing).

Use Case

External Links