FF Rev. 2.2 DVB-S Cards: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(grammar)
No edit summary
Line 1: Line 1:
[[DVB-S]] [[full-featured]] [[PCI_devices_DVB-S|PCI card]], revision 2.2.<BR>
[[DVB-S]] [[full-featured]] [[PCI_devices_DVB-S|PCI card]], revision 2.2.<BR>
Sold by [[Hauppauge]]. These cards have an onboard MPEG decoder and have originally been derived from the old [[Siemens]] DVB-C design. Based on an [[SAA7146]] PCI bridge and an [[AV711x]] [[MPEG2 Decoder]] they look quite old-fashioned now but have worked reliably for a long time and been the base for Projects like [[VDR]].
Sold by [[Hauppauge]]. These cards have an onboard MPEG decoder and have originally been derived from the old [[Siemens]] DVB-C design. Based on an [[SAA7146]] PCI bridge and an [[AV711x]] [[MPEG2 Decoder]] they look quite old-fashioned now but have worked reliably for a long time and been the base for Projects like [[VDR]].

A major drawback of this design is the low maximum [[Bus Bandwidth]] limited by the [[AV711x]], [[HDTV]] receiption or raw [[MPEG2 Transport Stream]] access is not possible. Since even [[HDTV]] [[MPEG2 Decoder]]s implemented in software perform well on every modern PC there is usually no need for cards with onboard MPEG2 Decoder today. An exception may be special software that relies on proprietary card features like [[VDR]] (and even there you can use the [[VDR Software Decoder Plugin]] which allows you to use any card you want).


These cards used over time many different [[Demodulator]]s and tuner modules, some examples are the [[STV0299]] and the [[TDA8083]].
These cards used over time many different [[Demodulator]]s and tuner modules, some examples are the [[STV0299]] and the [[TDA8083]].

A major drawback of this design is the low maximum [[Bus Bandwidth]] limited by the [[AV711x]], [[HDTV]] receiption or raw [[MPEG2 Transport Stream]] access is not possible.

Since even [[HDTV]] [[MPEG2 Decoder]]s implemented in software perform well on every modern PC there is usually no need for cards with onboard MPEG2 Decoder today. An exception may be special software that relies on proprietary card features like [[VDR]] (and even there you can use the [[VDR Software Decoder Plugin]] which allows you to use any card you want).


Linux Support for these cards is quite stable. A Firmware is required and available for download on http://www.linuxtv.org/.
Linux Support for these cards is quite stable. A Firmware is required and available for download on http://www.linuxtv.org/.

Revision as of 20:49, 24 September 2004

DVB-S full-featured PCI card, revision 2.2.
Sold by Hauppauge. These cards have an onboard MPEG decoder and have originally been derived from the old Siemens DVB-C design. Based on an SAA7146 PCI bridge and an AV711x MPEG2 Decoder they look quite old-fashioned now but have worked reliably for a long time and been the base for Projects like VDR.

A major drawback of this design is the low maximum Bus Bandwidth limited by the AV711x, HDTV receiption or raw MPEG2 Transport Stream access is not possible. Since even HDTV MPEG2 Decoders implemented in software perform well on every modern PC there is usually no need for cards with onboard MPEG2 Decoder today. An exception may be special software that relies on proprietary card features like VDR (and even there you can use the VDR Software Decoder Plugin which allows you to use any card you want).

These cards used over time many different Demodulators and tuner modules, some examples are the STV0299 and the TDA8083.

Linux Support for these cards is quite stable. A Firmware is required and available for download on http://www.linuxtv.org/.

Pictures

Hauppauge Nexus-s Rev. 2.2 Card

Links