Hauppauge DEC2000-T USB: Difference between revisions
m (removed TT question mark) |
m (add info from Temporary USB Device Holding page (which contained info from the former DVB USB article)) |
||
Line 17: | Line 17: | ||
I have not been able to find a [[CAM]] for [[Top-up TV]] in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware. |
I have not been able to find a [[CAM]] for [[Top-up TV]] in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware. |
||
The DEC is a set-top boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC output. |
|||
The following drivers are needed for this device: |
|||
- ttusbdecfe.ko |
|||
- ttusb_dec.ko |
|||
{{DvbDeviceList |
|||
| content= |
|||
{{DvbDevice |
|||
| device=[[Hauppauge]] [[Hauppauge DEC2000-T USB|DEC2000-T USB]] (DVB-T) |
|||
| type=USB1.1 |
|||
| fw=dvb-ttusb-dec-2000t.fw |
|||
| hw=DEC-specific |
|||
| pic=[http://www.hauppauge.de/pages/products/data_dec2000t.html] |
|||
}} |
|||
}} |
|||
== Under Debian == |
== Under Debian == |
Revision as of 16:15, 15 August 2007
A DVB-T USB 1.1 device from Hauppauge (actually manufactured by TechnoTrend) that can be used either as a PC peripheral or as a standalone STB.
Linux driver exists, Audio and Video work.
Overview
Card can only deliver a partial/modified TS stream to userspace. Card has an onboard hardware video+audio decoder. card driver: ttusb-dec interface: USB1.1 USB device id: 0b48:1008 Notes: These cards have the frontend hidden behind a USB interface
Based on the AV711x MPEG2 Decoder and the TDA10045 Demodulator.
It will not work with VDR as a primary device because it does not have a hardware MPEG2 decoder. It can be used with soft-device, streaming or xine or as secondary device.
I have not been able to find a CAM for Top-up TV in the UK despite Hauppauge providing them for other models. There is space for a CAM in the version of the hardware supplied with the 1.26 firmware.
The DEC is a set-top boxes equipped with a USB port and can be used without a PC. The TV-Out can't be used for PC output.
The following drivers are needed for this device:
- ttusbdecfe.ko - ttusb_dec.ko
Device / Model | Type | Hardware | Firmware | URL / Pictures |
---|---|---|---|---|
Comments & quirks | ||||
Hauppauge DEC2000-T USB (DVB-T) | USB1.1 | DEC-specific | dvb-ttusb-dec-2000t.fw | [1] |
Under Debian
- Follow the instructions in /usr/src/kernel-source-2.6.8/Documentation/dvb/.
- Use v1.26 of the firmware. Look on archive.org and use zip -F after download if necessary. The most recent version (1.28a?) did not work for me.
- Install dvb-utils
- Playback and channel changing (via the playlist) is possible with gxine.
- Set up the channels with
scan -o zap /usr/share/doc/dvb-utils/examples/scan/<country>-<region> > ~/.xine/channels.conf
- I've had problems with the picture not displaying, but that could be a driver problem.
- You can record programs with
tzap "Channel id" -r & cat /dev/dvb/adapter0/dvr0 > "Programme.mpeg" &