Difference between revisions of "Hauppauge WinTV-HVR-2250"

From LinuxTVWiki
Jump to: navigation, search
(Driver submitted to lkml)
Line 3: Line 3:
 
An [[ATSC]] [[ATSC PCIe Cards|PCIe card]] from [[Hauppauge]].   
 
An [[ATSC]] [[ATSC PCIe Cards|PCIe card]] from [[Hauppauge]].   
  
<B>Currently unsupported!</B>
+
== Overview/Features ==
 
+
==Overview/Features==
+
  
 
Dual hybrid digital/analog tuners, low profile.
 
Dual hybrid digital/analog tuners, low profile.
Line 14: Line 12:
 
* Dual built-in hardware MPEG-2 encoders.
 
* Dual built-in hardware MPEG-2 encoders.
 
   
 
   
===Components Used===
+
=== Components Used ===
 +
 
 
* [[NXP_SAA716x|NXP SAA7164]]
 
* [[NXP_SAA716x|NXP SAA7164]]
  
Line 32: Line 31:
 
[[File:WinTV_HVR-2250.jpg|200px]]
 
[[File:WinTV_HVR-2250.jpg|200px]]
  
==Making it Work==
+
== Making it Work ==
Steven Toth has released drivers for the HVR-22xx family cards.
+
 
http://www.steventoth.net/blog/products/hvr-2250/
+
In September 2009, Steven Toth at [http://kernellabs.com kernellabs] submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at [[Hauppauge WinTV-HVR-2200]]. Note that support is still  limited to DVB-T / ATSC / QAM digital TV only; there is no analog support yet.
 +
 
 +
See instructions at [[Hauppauge WinTV-HVR-2200]].
 +
 
 +
Development continues at http://www.steventoth.net/blog/products/hvr-2250/
 +
 
 +
=== Firmware ===
  
===Firmware===
 
 
The windows driver and linux firmware extraction scripts are up on
 
The windows driver and linux firmware extraction scripts are up on
 
http://www.steventoth.net/linux/hvr22xx
 
http://www.steventoth.net/linux/hvr22xx
  
===Drivers===
+
=== Drivers ===
For stable tree hg clone http://kernellabs.com/hg/saa7164-stable/ For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/
+
 
 +
Drivers are expected to be included in Linux 2.6.32.
 +
 
 +
In the meantime, for stable tree hg clone http://kernellabs.com/hg/saa7164-stable/  
 +
 
 +
For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/
  
 
then... make menuconfig edit as needed make make install reboot
 
then... make menuconfig edit as needed make make install reboot
  
===Sample Kernel Output===
+
=== Sample Kernel Output ===
 +
 
 
''provide the relevant portion of dmesg here''
 
''provide the relevant portion of dmesg here''
  
Line 51: Line 61:
  
 
==External Links==
 
==External Links==
 +
 
* [http://www.hauppauge.com/site/products/data_hvr2250.html Hauppauge Product Page]
 
* [http://www.hauppauge.com/site/products/data_hvr2250.html Hauppauge Product Page]
 +
 
[[Category:ATSC PCIe Cards]]
 
[[Category:ATSC PCIe Cards]]

Revision as of 04:38, 15 September 2009

caption

An ATSC PCIe card from Hauppauge.

Overview/Features

Dual hybrid digital/analog tuners, low profile.

  • Single slot PCI Express (PCIe) X1 board, half height.
  • Two analog tuners, each with their own hardware encoders
  • Two digital TV receivers for ATSC or clear QAM
  • Dual built-in hardware MPEG-2 encoders.

Components Used

Could someone who has this card please take a good look at the board and list all the chips here?

The REV C2F2 has

Identification

Other Images

Top view WinTV HVR-2250.jpg

Making it Work

In September 2009, Steven Toth at kernellabs submitted code to the linux kernel mailing list that adds support for the NXP Saa7164 PCIe A/V bridge used by the Hauppauge HVR-2250 card. See instructions at Hauppauge WinTV-HVR-2200. Note that support is still limited to DVB-T / ATSC / QAM digital TV only; there is no analog support yet.

See instructions at Hauppauge WinTV-HVR-2200.

Development continues at http://www.steventoth.net/blog/products/hvr-2250/

Firmware

The windows driver and linux firmware extraction scripts are up on http://www.steventoth.net/linux/hvr22xx

Drivers

Drivers are expected to be included in Linux 2.6.32.

In the meantime, for stable tree hg clone http://kernellabs.com/hg/saa7164-stable/

For Development tree hg clone http://kernellabs.com/hg/~stoth/saa7164-dev/

then... make menuconfig edit as needed make make install reboot

Sample Kernel Output

provide the relevant portion of dmesg here

Remote Controller Support

External Links