Hauppauge WinTV-dualHD

From LinuxTVWiki
Revision as of 09:48, 21 November 2023 by Chris299 (talk | contribs) (→‎Identification: shifted parts to other model)
Jump to navigation Jump to search

Overview/Features

A combined DVB-C, DVB-T and DVB-T2 USB 2.0 device from Hauppauge with two tuners. Similiar to Hauppauge_WinTV-soloHD.

There are two versions available with the same name that can be distinguished by model number, look and USB device ID:

  • Model 01590: Dual tuner for DVB-C, DVB-T and DVB-T2, has IEC connector, USB device ID 2040:0265 and a newer version USB device ID 2040:8265
  • Model 01595: Dual tuner for ATSC and clear QAM, has F-connector, USB device ID 2040:026d.

Model 01590 (USB device ID 2040:0265)

Components Used

Model 01595 (USB device ID 2040:026d)

Components Used

This version of the board is like a USB version of the Hauppauge WinTV-HVR-2255 PCIe card.

Identification

sudo lsusb -v -d 2040:026d
Bus 001 Device 006: ID 2040:026d Hauppauge 
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 idVendor           0x2040 Hauppauge
 idProduct          0x026d 
 bcdDevice            1.00
 iManufacturer           3 HCW
 iProduct                1 955D
 iSerial                 2 0011511574
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           55
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0 
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              500mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass      0 
     bInterfaceProtocol      0 
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0000  1x 0 bytes
       bInterval               1
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x85  EP 5 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0000  1x 0 bytes
       bInterval               1
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       1
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass      0 
     bInterfaceProtocol      0 
     iInterface              0 
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x84  EP 4 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x03ac  1x 940 bytes
       bInterval               1
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x85  EP 5 IN
       bmAttributes            1
         Transfer Type            Isochronous
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x03ac  1x 940 bytes
       bInterval               1
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0 
 bDeviceProtocol         0 
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)

Making it Work

The following part refers specifically to Model 01590 or Model 01595.

Firmware

The Model 01590 demodulator needs a firmware which can be found for example at http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/dvb-demod-si2168-b40-01.fw

The newer Version needs a different firmware dvb-demod-si2168-d60-01.fw (from https://github.com/CoreELEC/dvb-firmware/blob/master/firmware/dvb-demod-si2168-d60-01.fw) and usually comes already configured to bulk mode (see below)

Drivers

Only the first tuner on Model 01590 device is supported since Kernel 4.7 (see commit https://git.linuxtv.org/media_tree.git/commit/drivers/media/usb/em28xx?id=11a2a949d05e9d2d9823f0c45fa476743d9e462b).

Only the first tuner on Model 01595 device is supported since Kernel 4.11 (see commit https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=1586342e428d80e53f9a926b2e238d2175b9f5b5).

Both tuners on Model 01590 device and Model 01595 device are supported since Kernel 4.17 (see commit https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/diff/?id=be7fd3c3a8c5e9acbc69f887ca961df5e68cf6f0).

Setting Transfer Mode to bulk

The stick supports two transfer modes: isochronous and bulk, whereas most revisions use the isochronous mode by default. This often leads to artifacts being shown in the video stream when both tuners are active (e.g. when a EPG scan is running in the background). This problem has been confirmed by many users of the VDR (German language, https://www.vdr-portal.de/forum/index.php?thread/133363-gel%C3%B6st-wintv-dualhd-moduloption-um-nur-einen-tuner-zu-nutzen/), but is very likely to occurr with other software as well. You can check the mode your stick is using with dmesg. When the stick is detected there is a line that reads "dvb set to isoc mode" when in isochronous mode, when bulk mode is active, an analogous message is shown. Currently there is no known way to change that mode using a linux command or passing options to the kernel module. The only way to change it is to use a free windows tool provided by the manufacturer Hauppauge: https://www.hauppauge.de/site/support/support_faq.php?n=FAQ.BulkOrIso Please install the windows driver for the stick first, because they need to be installed before running the tool. After changing the mode to "bulk" using this tool, please check the dmesg messages again and verify that it now states "dvb set to bulk mode".

Sample Kernel Output (first tuner only)

[370.466385] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[370.607770] usb 1-1: New USB device found, idVendor=2040, idProduct=0265
[370.607777] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[370.607780] usb 1-1: Product: dualHD
[370.607783] usb 1-1: Manufacturer: HCW
[370.607786] usb 1-1: SerialNumber: 0011501234
[370.670696] Linux video capture interface: v2.00
[370.672517] em28xx: New device HCW dualHD @ 480 Mbps (2040:0265, interface 0, class 0)
[370.672525] em28xx: DVB interface 0 found: isoc
[370.672586] em28xx: chip ID is em28174
[371.903330] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x7addc1c8
[371.903335] em28174 #0: EEPROM info:
[371.903338] em28174 #0:      microcode start address = 0x0004, boot configuration = 0x01
[371.909585] em28174 #0:      AC97 audio (5 sample rates)
[371.909588] em28174 #0:      500mA max power
[371.909592] em28174 #0:      Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[371.909696] em28174 #0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[371.911890] tveeprom 11-0050: Hauppauge model 204109, rev B2I6, serial# 11501234
[371.911894] tveeprom 11-0050: tuner model is SiLabs Si2157 (idx 186, type 4)
[371.911896] tveeprom 11-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[371.911898] tveeprom 11-0050: audio processor is None (idx 0)
[371.911900] tveeprom 11-0050: has no radio, has IR receiver, has no IR transmitter
[371.911903] em28174 #0: dvb set to isoc mode.
[371.911973] usbcore: registered new interface driver em28xx
[371.915988] em28174 #0: Binding DVB extension
[371.919830] i2c i2c-11: Added multiplexed i2c bus 12
[371.919835] si2168 11-0064: Silicon Labs Si2168 successfully attached
[371.923717] si2157 12-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[371.923747] DVB: registering new adapter (em28174 #0)
[371.923758] usb 1-1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[371.925138] em28174 #0: DVB extension successfully initialized
[371.925145] em28xx: Registered (Em28xx dvb Extension) extension
[557.706723] si2168 11-0064: found a 'Silicon Labs Si2168-B40'
[557.706770] si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[557.915917] si2168 11-0064: firmware version: 4.0.11
[557.919622] si2157 12-0060: found a 'Silicon Labs Si2157-A30'
[557.968069] si2157 12-0060: firmware version: 3.0.5

Sample Kernel Output (both tuners; Linux 4.17-rc1, Model 01590, USB device ID 2040:0265)

[   55.197109] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[   55.197112] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   55.197113] tveeprom: audio processor is None (idx 0)
[   55.197115] tveeprom: has no radio, has IR receiver, has no IR transmitter
[   55.197122] em28xx 3-1.2:1.0: dvb set to isoc mode.
[   55.254525] em28xx 3-1.2:1.0: chip ID is em28174
[   56.418899] em28xx 3-1.2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0xece4c7c8
[   56.418904] em28xx 3-1.2:1.0: EEPROM info:
[   56.418907] em28xx 3-1.2:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
[   56.427984] em28xx 3-1.2:1.0: 	AC97 audio (5 sample rates)
[   56.427989] em28xx 3-1.2:1.0: 	500mA max power
[   56.427993] em28xx 3-1.2:1.0: 	Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[   56.482062] em28xx 3-1.2:1.0: Identified as Hauppauge WinTV-dualHD DVB (card=99)
[   56.484086] tveeprom: Hauppauge model 204109, rev B3I6, serial# 13886818
[   56.484090] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
[   56.484092] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   56.484094] tveeprom: audio processor is None (idx 0)
[   56.484096] tveeprom: has no radio, has IR receiver, has no IR transmitter
[   56.484102] em28xx 3-1.2:1.0: dvb ts2 set to isoc mode.
[   56.684816] usbcore: registered new interface driver em28xx
[   56.727880] em28xx 3-1.2:1.0: Binding DVB extension
[   56.751607] i2c i2c-23: Added multiplexed i2c bus 26
[   56.751611] si2168 23-0064: Silicon Labs Si2168-B40 successfully identified
[   56.751613] si2168 23-0064: firmware version: B 4.0.2
[   56.765538] si2157 26-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[   56.765572] dvbdev: DVB: registering new adapter (3-1.2:1.0)
[   56.765576] em28xx 3-1.2:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[   56.766241] em28xx 3-1.2:1.0: DVB extension successfully initialized
[   56.766245] em28xx 3-1.2:1.0: Binding DVB extension
[   56.772265] i2c i2c-25: Added multiplexed i2c bus 27
[   56.772270] si2168 25-0067: Silicon Labs Si2168-B40 successfully identified
[   56.772273] si2168 25-0067: firmware version: B 4.0.2
[   56.775424] si2157 27-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached
[   56.775466] dvbdev: DVB: registering new adapter (3-1.2:1.0)
[   56.775470] em28xx 3-1.2:1.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
[   56.776032] em28xx 3-1.2:1.0: DVB extension successfully initialized
[   56.776035] em28xx: Registered (Em28xx dvb Extension) extension
[   56.794955] em28xx 3-1.2:1.0: Registering input extension
[   56.827291] Registered IR keymap rc-hauppauge
[   56.828225] rc rc0: 3-1.2:1.0 IR as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/rc/rc0
[   56.828314] input: 3-1.2:1.0 IR as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/rc/rc0/input23
[   56.890025] em28xx 3-1.2:1.0: Input extension successfully initialized
[   56.890031] em28xx 3-1.2:1.0: Remote control support is not available for this card.
[   56.890033] em28xx: Registered (Em28xx Input Extension) extension

Remote Control Support

Untested.

External Links