[linux-dvb] VDR: No OSD, switching channel fails

["Schmidt, Norbert" <n.schmidt@sap.com>]

Hi vdr'ler,

after succesfully testing the hardware under win98, deleting win98 ;-) and
installing
suse 7.2, kernel 2.4.4-4GB with dvb-s rev. 2.1 from Hauppauge, I tried to
install DVB/VDR 
using at least the latest driver/program from Klaus' homepage
(0.9/0.85-20010729) with 
standard conf's in /video.

The following happens:

	DRIVER - make, make insmod 
	=> loading USING i2c-core.o/videodev.o 
	=> I did nothing to load dvb.o module *without* option 'outstream=0'
(is that right?)
	=> n-tv appears on tv (s-vhs)

AND	VDR    - make (=>OK)
	=> When I run vdr there is no OSD available on TV and channel
switching is impossible.

OR	VDR    - make DEBUG_OSD=1 (=>OK)
	=> When I start vdr the OSD appears at PC-Monitor and works well,
and channel switching 
	   is impossible. For your info: when I start with vdr 0.83/0.84 no
OSD comes up!

I'm not sure whether I miss something or not, so hints are welcome ;-)

For further details find the /var/log/messages at the end. 

Bye Norbert

============================================================================
==================

LOADING THE DRIVER

kernel: i2c-core.o: i2c core module
kernel: Linux video capture interface: v1.00
kernel: i2c-core.o: driver VES1893 DVB demodulator registered.
kernel: i2c-core.o: driver VES1820 DVB demodulator registered.
kernel: i2c-core.o: driver tda8083 DVB demodulator registered.
kernel: i2c-core.o: driver stv0299 DVB demodulator registered.
kernel: i2c-core.o: driver i2c TV tuner driver registered.
kernel: saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd29cc000.
kernel: i2c-core.o: client [stv0299] registered to adapter [saa7146(1)](pos.
0).
kernel: tuner: chip found @ 0x61
kernel: i2c-core.o: client [i2c tv tuner chip] registered to adapter
[saa7146(1)](pos. 1).
kernel: i2c-core.o: adapter saa7146(1) registered as adapter 0.
kernel: dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app
00010002
kernel: dvb: 1 dvb(s) found!

--> Seems OK to me


STARTING VDR

vdr[910]:vdr version 0.85 started
vdr[910]: loading /video/setup.conf
vdr[910]: loading /video/channels.conf
vdr[910]: loading /video/timers.conf
vdr[910]: loading /video/keys-pc.conf
vdr[910]: probing /dev/ost/qpskfe0
vdr[910]: ERROR: /dev/ost/demux0: Device or resource busy
???????????????????
	last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2084): Bad file descriptor
???????????????????
vdr[910]: ERROR: can't open video device 0
vdr[910]: probing /dev/ost/qpskfe1
vdr[910]: ERROR: /dev/ost/demux1: Device or resource busy
	last message repeated 5 times
	modprobe: modprobe: Can't locate module char-major-81-1
vdr[910]: ERROR (dvbapi.c,2084): Bad file descriptor
vdr[910]: ERROR: can't open video device 1
vdr[910]: probing /dev/ost/qpskfe2
vdr[910]: ERROR: /dev/ost/demux2: Device or resource busy
	last message repeated 5 times
	modprobe: modprobe: Can't locate module char-major-81-2
vdr[910]: ERROR (dvbapi.c,2084): Bad file descriptor
vdr[910]: ERROR: can't open video device 2
vdr[910]: found 3 video devices
vdr[910]: setting primary DVB to 1
vdr[910]: switching to channel 15
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
???????????????????
	last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
???????????????????
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 15 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
	last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 15 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
	last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 15 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: SVDRP listening on port 2001
vdr[910]: setting watchdog timer to 60 seconds
vdr[910]: max. latency time 1 seconds
vdr[910]: switching to channel 2
!!!!  tried to switch
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
	last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 2 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
 last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 2 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: ERROR (dvbapi.c,2090): Bad file descriptor
 last message repeated 5 times
vdr[910]: ERROR (dvbapi.c,2229): Unknown error 515
vdr[910]: ERROR: timeout while tuning 
vdr[910]: ERROR: channel 2 not sync'ed!
vdr[910]: panic level: 0
vdr[910]: retrying
vdr[910]: max. latency time 15 seconds
vdr[910]: caught signal 2
!!!!  ctrl-c
vdr[910]: saved setup to /video/setup.conf
vdr[910]: max. latency time 15 seconds
vdr[910]: exiting


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.