[linux-dvb] Re: VDR & DVD Support library problem / Title key error

[Uwe Ortner <uwe.ortner@classic-net.de>]

you solved it!

thanks a lot
Uwe


Thomas Heiligenmann wrote:
> 
> Uwe Ortner wrote:
> >
> > Sergei Haller wrote:
> > >
> > > On Sun, 9 Sep 2001, Uwe Ortner wrote:
> > >
> > > > I've trouble playing DVDs in VDR (0.94):
> > > >
> > > > First of all my vdr cant compile with libdvdread-0.9.0
> > Thanks a lot
> > This is working fine ...
> >
> > Now I have that "Cannot get title key" problem
> >
> > any ideas?
> >
> > My DVD is a Pioneer 116
> > /dev/dvd points to /dev/hdc
> > brw-rw-rw- /dev/hdc
> >
> > Starting vdr with  vdr -s '/sbin/shutdown -h' -V /dev/hdc -m
> > /media/cdrom (make DVD=1 MP3=1)
> >
> > also automounter is enabled
> > auto.master:
> > /media  /etc/auto.media timeout=5
> >
> > auto.media:
> > cdrom           -fstype=iso9660,ro      :/dev/hdc
> > dvd             -fstype=auto,w          :/dev/hdc
> > floppy          -fstype=auto            :/dev/fd0
> >
> > fstab:
> > cdrom/floppy/dvd -> remarked
> >
> > /etc/init.d/boot.local:
> > hdparm -d1 /dev/hdc
> > setserial /dev/ttySo uart none # needed by lirc
> >
> > BTW: MP3 also doesnt work (mpg123 is installed)
> >
> > Any comment is highly appreciated
> >
> 
> Maybe the following excerpt from the OMS-HOWTO will help:
> 
> I think I have a region code problem with my drive
> Run dmesg to see if you have a problem. You may see output like the
> following:
> ATAPI device hdc:
> Error: Illegal request -- (Sense key=0x05)
> System resource failure -- (asc=0x55, ascq=0x00)
> Media region code is mismatched to logical unit -- (asc=0x6f, ascq=0x04)
> The failed "Report Key" packet command was:
> "a4 00 00 00 00 00 00 00 00 0c 04 00 "
> Get the regionset program from linuxtv.org use that to reset the region
> on your dvd drive.
> Remember: you can only do this 5 times or so on most drives, so dont
> get carried away.
> To compile, untar the file downloaded, and run:1. # gcc -c dvd_udf.c
> 2. # gcc -c regionset.c
> 3. # gcc -o regionset dvd_udf.o regionset.o
> 4. # ./regionset
> If you have no region code set, you will see type: NONE as part of the
> output, as well as drive
> plays discs from region(s): with no number after it.
> Set the code according to your region (see here for a map):
> CODE REGIONS
> 1. USA & Canada
> 2. Europe & Japan
> 3. South East Asia
> 4. Latin America & Australia
> 5. Russia & Africa
> 6. (Peoples Republic of) China
> 7. Reserved
> 8. Special international venues (airplanes, cruise ships, etc.)
> After you enter the region code, the program prompts you with a message
> similiar to: New mask:
> 0xFFFFFFFE, correct? [y/n]. It is usually safe to just answer y here.
> 
> "GetTitleKey failed: Input/output error"
> This may appear for other reasons, but one reason was because the region
> code on the DVD drive
> wasnt set at all (e.g. you have a brand new DVD drive and havent run
> any Windows DVD
> software). See above subsection for a fix.
> 
> Good Luck
> Thomas
> 
> --
> Info:
> To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.