[linux-dvb] Re: No picture since some days

["Gerhard Steiner" <steiner@mail.austria.com>]

Hello,
same problem here. I am using the driver from 2005-20-02
together with vdr 1.0.4. AIO 1009.
Since some days with screen is black and there is now sound.
When switching to a channel there is no error message
(nothing, it seems to be like ever).

When using dvbtune I get this messages:
firix:/home/daten/VDR/dvbtune-0.3 # ./dvbtune -f 338000000
-i
tuning DVB-T to 338000000
Getting frontend event
Received completion event
Event:  Frequency: 314000000
Bit error rate: -1009688576
Signal strength: 5
SNR: 1
FE_STATUS: FE_HAS_POWER FE_HAS_SIGNAL FE_HAS_LOCK
FE_HAS_CARRIER FE_HAS_SYNC
<transponder type="T" freq="338000000">
Nothing to read from fd_pat
Nothing to read from fd_sdt
</transponder>

Can someone tell me what that means?
Even dtv_scan is still giving me the same output and
channels.conf as ever.

lg, Gerhard

On Sun, 17 Nov 2002 18:39:37 +0100
 Martin Neuditschko <yosuke.tomoe@gmx.net> wrote:
> Hello!
> 
> Since some days I don' t get any picture / sound anymore.
> I am using UPC Digital (Austria) - a cable provider and
> the
> "Hauppauge DVB-c" card.
> I am able to tune to each channel (using czap) and it
> locks
> very fast, but I don't see anything. Also dvbsak is
> working.
> DVB-driver from 16.10.02 (whis version was working till
> some
> days ago)
> 
> Sample outputs:
> ,----
> | melchior:/usr/local/src/devel/DVB/apps/szap # ./czap
> RTL2
> | using '/dev/dvb/adapter0/frontend0' and
> '/dev/dvb/adapter0/demux0'
> | tuning to 378000000 Hz
> | status 07 | signal 8787 | snr d8d8 | ber 00009c22 | unc
> ffffffff |
> | status 1f | signal ffff | snr ebeb | ber 00009c22 | unc
> ffffffff |
> | FE_HAS_LOCK
> | status 1f | signal ffff | snr ebeb | ber 00009c22 | unc
> 00000000 |
> | FE_HAS_LOCK
> | status 1f | signal ffff | snr ecec | ber 0002efcb | unc
> 00000000 |
> | FE_HAS_LOCK
> | status 1f | signal ffff | snr eded | ber 00010a00 | unc
> 00000000 |
> | FE_HAS_LOCK
> `----
> ,----
> | melchior:/usr/local/src/devel/dvbsak # ./dvbscan -p
> | [PAT 0009] [SDT 0009] [NIT 0009] [NIT 0009] Transport
> streams:
> | 0x0009:
> | 0x0012:
> | Orig. network id:        0x0001
> | Cable frequency:         466.000 MHz
> | Cable symbol rate:       6900.000 ksym/s
> | Cable modulation:        256-QAM
> | Cable inner FEC rate:    auto
> | 0x001A:
> | Orig. network id:        0x0001
> | Cable frequency:         842.000 MHz
> | Cable symbol rate:       6900.000 ksym/s
> | Cable modulation:        256-QAM
> | Cable inner FEC rate:    auto
> |
> | [snip]
> |
> | 0x232D: RTL II>RTL2 [Provider: UPC-TS 09], digital
> television service
> |   CA system:               unknown_4749
> |   CA ECM/EMM PID:          0x0001
> |   PCR PID:                 0x08C0
> |   Stream PID 0x08C2, ISO/IEC 13818-1 PES packets
> containing
> |   private data
> |   Stream PID 0x08C1, ISO/IEC 11172 Audio
> |     Language code: ger
> |   Stream PID 0x08C0, ISO/IEC 13818-2 Video
> |
> | [snip]
> `----
> 
> Some ideas to solve or determine the problem?
> 
> best regards
> Martin Neuditschko
> 
> 
> -- 
> Info:
> To unsubscribe send a mail to listar@linuxtv.org with
> "unsubscribe linux-dvb" as subject.
> 

----------------------------------------------
Das ist ein Service von austria.com


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.