[linux-dvb] Re: budget hang after EPG scan (Was: Re: cinergyT2:which kernel/usb module to use?)

[Simon <ml_vdr_simon@bigblue.demon.co.uk>]

Andrew de Quincey wrote:

> On Saturday 04 Dec 2004 11:13, Simon wrote:
[...]

> > Im using vanilla 2.6.8.1 kernel + patch listed at the end.
> > 2xTwinhan DVB-T cards.
> > Slackware 10, VDR-1.3.12+patches and vdradmin-0.96.
>
> Aarrgh, so this was the same problem - that everything appears to works fine, 
> its just that there is no data from the budget cards?
>
> Which Twinhan cards are they BTW?
not sure what you want, so:

from dmesg:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 
0xde011000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID 
is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00fb7afe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bttv: Bt8xx card found (1).
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 5 (level, low) -> IRQ 5
bttv1: Bt878 (rev 17) at 0000:00:0b.0, irq: 5, latency: 32, mmio: 0xde013000
bttv1: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID 
is 1822:0001
bttv1: using: Twinhan DST + clones [card=113,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00fb4bfe [init]
bttv1: using tuner=4
bttv1: add subdevice "dvb1"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 11, latency: 32, memory: 
0xde012000
bt878: Bt878 AUDIO function found (1).
ACPI: PCI interrupt 0000:00:0b.1[A] -> GSI 5 (level, low) -> IRQ 5
bt878(1): Bt878 (rev 17) at 00:0b.1, irq: 5, latency: 32, memory: 0xde014000
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
attach: checking "bt878 #1 [hw]"
find by pci: checking "bt878 #1 [hw]"
attach: "bt878 #1 [hw]", to card 1
DVB: registering new adapter (DST).
DVB: registering new adapter (DST).
bt878 find by dvb adap: checking "DST"
dst_check_ci: recognize DTTDIG
DST type : terrestial TV
DST type flags :
DVB: registering frontend 0:0 (DST TERR)...
bt878 find by dvb adap: checking "DST"
dst_check_ci: recognize DTTDIG
DST type : terrestial TV
DST type flags :
DVB: registering frontend 1:0 (DST TERR)...

Simon