[linux-dvb] Re: Twinhan CA

[Dominique Dumont <domi.dumont@free.fr>]

Manu Abraham <manu@kromtek.com> writes:

>> dvb-bt8xx
>> bttv  i2c_hw=1 card=0x71
>> tuner debug=1
>> dst   dst_debug=1
>>
> what does dst_check_ci report, i mean Card iD ? For example i get DSTMCI...

dst_check_ci reports DST-CI. Here's dmesg complete output:

bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 19, latency: 32, mmio: 0xd8000000
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00f3e5fd [init]
bttv0: using tuner=4
tuner: Ignoring new-style parameters in presence of obsolete ones
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:07.1[A] -> GSI 19 (level, high) -> IRQ 19
bt878(0): Bt878 (rev 17) at 01:07.1, irq: 19, latency: 32, memory: 0xd8001000
attach: checking "SMBus nForce2 adapter at 5000"
attach: checking "SMBus nForce2 adapter at 5500"
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (DST).
dst_attach: check ci
bt878 find by dvb adap: checking "DST"
read_dst reply is 0xff
dst_wait_dst_ready: dst wait ready after 0
read_dst reply is 0x0
dst_check_ci: recognize DST-CI
DST type : satellite
DST type flags : 0x1 newtuner 0x2 ts204
dst_attach: register dst df295160 bt e0aceb60 i2c df357760
DVB: registering frontend 0:0 (DST SAT)...

>> I'm currently stuck with vdr failing to open /dev/dvb/adapter0/ca0
>> with a "no such device" error message.
>>
> Just hold your horses.. Almost there..

That's excellent news ! (I was considering installing windows in a
small partition to get satellite ... Ugh )

Thanks