[linux-dvb] Re: Twinhan CA

[Manu Abraham <manu@kromtek.com>]

On Sun December 5 2004 10:12 pm, Dominique Dumont wrote:
> Manu Abraham <manu@kromtek.com> writes:
> >> dvb-bt8xx
> >> bttv  i2c_hw=1 card=0x71
> >> tuner debug=1
> >> dst   dst_debug=1
> >
> > what does dst_check_ci report, i mean Card iD ? For example i get
> > DSTMCI...
>
> dst_check_ci reports DST-CI. Here's dmesg complete output:
>
> bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 19, latency: 32, mmio:
> 0xd8000000 bttv0: using: Twinhan DST + clones [card=113,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00f3e5fd [init]
> bttv0: using tuner=4
> tuner: Ignoring new-style parameters in presence of obsolete ones
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:01:07.1[A] -> GSI 19 (level, high) -> IRQ 19
> bt878(0): Bt878 (rev 17) at 01:07.1, irq: 19, latency: 32, memory:
> 0xd8001000 attach: checking "SMBus nForce2 adapter at 5000"
> attach: checking "SMBus nForce2 adapter at 5500"
> attach: checking "bt878 #0 [hw]"
> find by pci: checking "bt878 #0 [hw]"
> attach: "bt878 #0 [hw]", to card 0
> DVB: registering new adapter (DST).
> dst_attach: check ci
> bt878 find by dvb adap: checking "DST"
> read_dst reply is 0xff
> dst_wait_dst_ready: dst wait ready after 0
> read_dst reply is 0x0
> dst_check_ci: recognize DST-CI
That's okay... Would work, perfectly. just be patient..

Manu

> DST type : satellite
> DST type flags : 0x1 newtuner 0x2 ts204
> dst_attach: register dst df295160 bt e0aceb60 i2c df357760
> DVB: registering frontend 0:0 (DST SAT)...
>
> >> I'm currently stuck with vdr failing to open /dev/dvb/adapter0/ca0
> >> with a "no such device" error message.
> >
> > Just hold your horses.. Almost there..
>
> That's excellent news ! (I was considering installing windows in a
> small partition to get satellite ... Ugh )
>
> Thanks