[linux-dvb] Re: /dev/dvb0.dvr0 instead of/dev/dvb/adapter0/dvr0 ??

[<merge@paulpettigrew.com>]

Hi Kimmo,

Thanks again for some more handy tips :-)

After following your instructions and doing an "./insmod.sh load" I get the 
output reproduced below in /var/log/messages

To me, this all looks fine(?). Is the issue that the contents of 
/etc/udev/scripts/dvb.sh need to be changed from:

#!/bin/sh
/bin/echo $1 | /bin/sed -e
's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,'

...to some other format that produces the correct /dev/dvb/adapter0/ directory 
structure?

If so, then what this string should be is beyond my coding skills.

Or is the real issue elsewhere?

Many thanks again,

Paul

--------------/var/log/messages/--------------
Dec 11 22:31:08 mythtv kernel: Linux video capture interface: v1.00
Dec 11 22:31:09 mythtv kernel: saa7146: register extension 'dvb'.
Dec 11 22:31:09 mythtv hal.hotplug[3406]: DEVPATH is not set
Dec 11 22:31:09 mythtv udev[3415]: configured rule in 
'/etc/udev/rules.d/50-udev.rules' at line 25 applied, 'event2' becomes 
'input/%k'
Dec 11 22:31:09 mythtv udev[3415]: creating device node '/dev/input/event2'
Dec 11 22:31:09 mythtv kernel: saa7146: register extension 'budget dvb'.
Dec 11 22:31:09 mythtv kernel: saa7146: register extension 'budget_ci dvb'.
Dec 11 22:31:09 mythtv kernel: ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 
(level, low) -> IRQ 11
Dec 11 22:31:09 mythtv kernel: saa7146: found saa7146 @ mem 42c2c000 (revision 
1, irq 11) (0x13c2,0x1011).
Dec 11 22:31:09 mythtv kernel: DVB: registering new adapter 
(TT-Budget/WinTV-NOVA-T      PCI).
Dec 11 22:31:09 mythtv kernel: adapter has MAC addr = 00:d0:5c:23:14:74
Dec 11 22:31:09 mythtv hal.hotplug[3444]: DEVPATH is not set
Dec 11 22:31:09 mythtv kernel: DVB: registering frontend 0 (Philips TDA10045H 
DVB-T)...
Dec 11 22:31:09 mythtv kernel: saa7146: register extension 'budget dvb /w 
video in'.
Dec 11 22:31:09 mythtv kernel: usbcore: registered new driver 
Technotrend/Hauppauge USB-Nova
Dec 11 22:31:09 mythtv kernel: usbcore: registered new driver ttusb-dec
Dec 11 22:31:09 mythtv kernel: usbcore: registered new driver dvb_dibusb
Dec 11 22:31:09 mythtv kernel: usbcore: registered new driver cinergyT2
Dec 11 22:31:14 mythtv udev[3499]: configured rule in 
'/etc/udev/rules.d/50-udev.rules' at line 25 applied, 'event3' becomes 
'input/%k'
Dec 11 22:31:14 mythtv udev[3493]: creating device node '/dev/dvb0.demux0'
Dec 11 22:31:14 mythtv udev[3499]: creating device node '/dev/input/event3'
Dec 11 22:31:14 mythtv udev[3495]: creating device node '/dev/dvb0.dvr0'
Dec 11 22:31:14 mythtv udev[3497]: creating device node '/dev/dvb0.net0'
Dec 11 22:31:14 mythtv udev[3506]: creating device node '/dev/dvb0.frontend0'


============
On Sat, 11 Dec 2004 12:56:49 +0200
 Kimmo Koivisto <kimmo.koivisto@surfeu.fi> wrote:
> On Saturday 11 December 2004 12:34, merge@paulpettigrew.com wrote:
> > Thanks again Kimmo. I am sure that your advice is correct...but there is
> > something else that is not working for me :-(
> >
> > Other ideas needed please.
> Try to add line
> KERNEL="dvb", NAME=""
> to the top of the dvb.rules and check udev output from /var/log/messages.
>
> To see more detailed logs, enable logging from udev.conf
> udev_log="no" -> udev_log="yes"
> I don't know if logging needs reboot or not.
>
> Anyway, check out /var/log/messages after change.
> #grep udev /var/log/messages.
>
> Regards
> Kimmo Koivisto