|
> On Wed December 29 2004 11:50 pm, Berry Perzon wrote:
> > The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using kernel
> > 2.6.10-rc3-mm1. Any ideas?
> >
> That card is a VP-3040 ?
>
> Manu
That's correct, I just checked it. Why?
> > Dec 29 19:12:31 srv01 kernel: Linux video capture interface: v1.00
> > Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15 loaded
> > Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with 2080k (520 pages)
> > each for capture
> > Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0).
> > Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 3
> > (level, low) -> IRQ 3
> > Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at 0000:03:04.0, irq:
> > 3, latency: 32, mmio: 0xf4081000
> > Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan VisionPlus DVB-T
> > [card=113], PCI subsystem ID is 1822:0001
> > Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST + clones
> > [card=113,autodetected]
> > Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000, out=00000000
> > in=00f500fd [init] Dec 29 19:12:31 srv01 kernel: bttv0: using tuner=4
> > Dec 29 19:12:31 srv01 kernel: bttv0: add subdevice "dvb0"
> > Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0 loaded
> > Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO function found (0).
> > Dec 29 19:12:42 srv01 kernel: ACPI: PCI interrupt 0000:03:04.1[A] -> GSI 3
> > (level, low) -> IRQ 3
> > Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at 03:04.1, irq: 3,
> > latency: 32, memory: 0xf4082000
> > Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter (bttv0).
> > Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to recognize or DTT-CI
> > Dec 29 19:12:48 srv01 kernel: dst_check_ci please email
> > linux-dvb@linuxtv.org with this type in
> > Dec 29 19:12:48 srv01 kernel: DST type : satellite
> > Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv
> > Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST DVB-S)...
------- End of Original Message -------
|