[linux-dvb] Re: TwinhanDTV Ter-CI

[Manu Abraham <manu@kromtek.com>]

On Thu December 30 2004 12:40 am, Berry Perzon wrote:
> > On Wed December 29 2004 11:50 pm, Berry Perzon wrote:
> > > The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using kernel
> > > 2.6.10-rc3-mm1. Any ideas?
> >
> > That card is a VP-3040 ?
> >
> > Manu
>
> That's correct, I just checked it. Why?
I have added that card to the latest code, have not but committed it yet, but 
will do soon. That card has some more registers, and return values are also a 
bit different.

The signal strength translation also is different for the card.

You have the CA daughterboard ?

Manu

>
> > > Dec 29 19:12:31 srv01 kernel: Linux video capture interface: v1.00
> > > Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15 loaded
> > > Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with 2080k (520
> > > pages) each for capture
> > > Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0).
> > > Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A] ->
> > > GSI 3 (level, low) -> IRQ 3
> > > Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at 0000:03:04.0,
> > > irq: 3, latency: 32, mmio: 0xf4081000
> > > Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan VisionPlus DVB-T
> > > [card=113], PCI subsystem ID is 1822:0001
> > > Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST + clones
> > > [card=113,autodetected]
> > > Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000, out=00000000
> > > in=00f500fd [init] Dec 29 19:12:31 srv01 kernel: bttv0: using tuner=4
> > > Dec 29 19:12:31 srv01 kernel: bttv0: add subdevice "dvb0"
> > > Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0 loaded
> > > Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO function found (0).
> > > Dec 29 19:12:42 srv01 kernel: ACPI: PCI interrupt 0000:03:04.1[A] ->
> > > GSI 3 (level, low) -> IRQ 3
> > > Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at 03:04.1, irq:
> > > 3, latency: 32, memory: 0xf4082000
> > > Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter (bttv0).
> > > Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to recognize  or
> > > DTT-CI Dec 29 19:12:48 srv01 kernel: dst_check_ci please email
> > > linux-dvb@linuxtv.org with this type in
> > > Dec 29 19:12:48 srv01 kernel: DST type : satellite
> > > Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv
> > > Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST
> > > DVB-S)...
>
> ------- End of Original Message -------