[linux-dvb] Re: TwinhanDTV Ter-CI

[Manu Abraham <manu@kromtek.com>]

On Thu December 30 2004 11:24 am, Jack Burghardt wrote:
> Manu Abraham wrote:
> >On Thu December 30 2004 12:40 am, Berry Perzon wrote:
> >>>On Wed December 29 2004 11:50 pm, Berry Perzon wrote:
> >>>>The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using kernel
> >>>>2.6.10-rc3-mm1. Any ideas?
> >>>
> >>>That card is a VP-3040 ?
> >>>
> >>>Manu
> >>
> >>That's correct, I just checked it. Why?
> >
> >I have added that card to the latest code, have not but committed it yet,
> > but will do soon. That card has some more registers, and return values
> > are also a bit different.
> >
> >The signal strength translation also is different for the card.
> >
> >You have the CA daughterboard ?
> >
> >Manu
> >
> >>>>Dec 29 19:12:31 srv01 kernel: Linux video capture interface: v1.00
> >>>>Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15 loaded
> >>>>Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with 2080k (520
> >>>>pages) each for capture
> >>>>Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0).
> >>>>Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A] ->
> >>>>GSI 3 (level, low) -> IRQ 3
> >>>>Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at 0000:03:04.0,
> >>>>irq: 3, latency: 32, mmio: 0xf4081000
> >>>>Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan VisionPlus DVB-T
> >>>>[card=113], PCI subsystem ID is 1822:0001
> >>>>Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST + clones
> >>>>[card=113,autodetected]
> >>>>Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000, out=00000000
> >>>>in=00f500fd [init] Dec 29 19:12:31 srv01 kernel: bttv0: using tuner=4
> >>>>Dec 29 19:12:31 srv01 kernel: bttv0: add subdevice "dvb0"
> >>>>Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0 loaded
> >>>>Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO function found (0).
> >>>>Dec 29 19:12:42 srv01 kernel: ACPI: PCI interrupt 0000:03:04.1[A] ->
> >>>>GSI 3 (level, low) -> IRQ 3
> >>>>Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at 03:04.1, irq:
> >>>>3, latency: 32, memory: 0xf4082000
> >>>>Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter (bttv0).
> >>>>Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to recognize  or
> >>>>DTT-CI Dec 29 19:12:48 srv01 kernel: dst_check_ci please email
> >>>>linux-dvb@linuxtv.org with this type in
> >>>>Dec 29 19:12:48 srv01 kernel: DST type : satellite
> >>>>Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv
> >>>>Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST
> >>>>DVB-S)...
> >>
> >>------- End of Original Message -------
>
> No I don't have ca it is 1020
VP-1020 is a DVB-S FTA card.. It is not a Terrestrial card ... The VP-3040 is 
a terestrial card which has an optional CA daughterboard.. That's the one 
that i was talking about. not the VP-1020.

The VP-1020 works reasonably well, i have 2 VP-1020 cards with me. Works 
good .. 

The logs show a card with a CI, not a VP-1020 DVB-S FTA card ..

I think you copy - pasted  from another post or replied to another post ?
Please don't mix up the threads... Please do check my other mail ..

Manu