[linux-dvb] Re: TwinhanDTV Ter-CI

["Berry Perzon" <berry@perzon.se>]

> On Thu December 30 2004 12:40 am, Berry Perzon wrote: 
> > > On Wed December 29 2004 11:50 pm, Berry Perzon wrote: 
> > > > The DVB-T card is a brand new "TwinhanDTV Ter-CI". I'm using kernel 
> > > > 2.6.10-rc3-mm1. Any ideas? 
> > > 
> > > That card is a VP-3040 ? 
> > > 
> > > Manu 
> > 
> > That's correct, I just checked it. Why? 
> I have added that card to the latest code, have not but committed it yet, but 
> will do soon. That card has some more registers, and return values are also a 
> bit different. 
> 
> The signal strength translation also is different for the card. 
> 
> You have the CA daughterboard ? 
> 
> Manu 
> 

Yes, I have the CA daughterboard. I also have a "SCM CA-modul" and a Boxer (Swedish) 
card. If you need any extra testing of the latest code, please let me know. Maybe I can 
help you with that.

I found another message, written by you Manu, in 
http://www.linuxtv.org/mailinglists/linux-dvb/2004/12-2004/msg00600.html.

I just downloaded the dvb-kernel from 16-Dec-2004, and pathed it. I can't test it right 
now, because I'm at work, but I will give it a go when I get home tonight.


> > 
> > > > Dec 29 19:12:31 srv01 kernel: Linux video capture interface: v1.00 
> > > > Dec 29 19:12:31 srv01 kernel: bttv: driver version 0.9.15 loaded 
> > > > Dec 29 19:12:31 srv01 kernel: bttv: using 8 buffers with 2080k (520 
> > > > pages) each for capture 
> > > > Dec 29 19:12:31 srv01 kernel: bttv: Bt8xx card found (0). 
> > > > Dec 29 19:12:31 srv01 kernel: ACPI: PCI interrupt 0000:03:04.0[A] -> 
> > > > GSI 3 (level, low) -> IRQ 3 
> > > > Dec 29 19:12:31 srv01 kernel: bttv0: Bt878 (rev 17) at 0000:03:04.0, 
> > > > irq: 3, latency: 32, mmio: 0xf4081000 
> > > > Dec 29 19:12:31 srv01 kernel: bttv0: detected: Twinhan VisionPlus DVB-T 
> > > > [card=113], PCI subsystem ID is 1822:0001 
> > > > Dec 29 19:12:31 srv01 kernel: bttv0: using: Twinhan DST + clones 
> > > > [card=113,autodetected] 
> > > > Dec 29 19:12:31 srv01 kernel: bttv0: gpio: en=00000000, out=00000000 
> > > > in=00f500fd [init] Dec 29 19:12:31 srv01 kernel: bttv0: using tuner=4 
> > > > Dec 29 19:12:31 srv01 kernel: bttv0: add subdevice "dvb0" 
> > > > Dec 29 19:12:42 srv01 kernel: bt878: AUDIO driver version 0.0.0 loaded 
> > > > Dec 29 19:12:42 srv01 kernel: bt878: Bt878 AUDIO function found (0). 
> > > > Dec 29 19:12:42 srv01 kernel: ACPI: PCI interrupt 0000:03:04.1[A] -> 
> > > > GSI 3 (level, low) -> IRQ 3 
> > > > Dec 29 19:12:42 srv01 kernel: bt878(0): Bt878 (rev 17) at 03:04.1, irq: 
> > > > 3, latency: 32, memory: 0xf4082000 
> > > > Dec 29 19:12:48 srv01 kernel: DVB: registering new adapter (bttv0). 
> > > > Dec 29 19:12:48 srv01 kernel: dst_check_ci: unable to recognize  or 
> > > > DTT-CI Dec 29 19:12:48 srv01 kernel: dst_check_ci please email 
> > > > linux-dvb@linuxtv.org with this type in 
> > > > Dec 29 19:12:48 srv01 kernel: DST type : satellite 
> > > > Dec 29 19:12:48 srv01 kernel: DST type flags : 0x4 symdiv 
> > > > Dec 29 19:12:48 srv01 kernel: DVB: registering frontend 0 (DST 
> > > > DVB-S)... 
> > 
> > ------- End of Original Message ------- 
------- End of Original Message -------